Industrial:
Cat® C18 Industrial Power Unit
Contact Us About This Product
Click a link to download the document:
- Minimum Power
- 575.0 bhp
- Maximum Power
- 630.0 bhp
- Emissions
- U.S. EPA Tier 4 Final, EU Stage IV nonroad emission standards. Designed to meet proposed EU Stage V nonroad emission standards.
- Rated Speed
- 1800-2000 rpm
The Cat® C18 Industrial Power Unit is offered in ratings ranging from 429-470 bkW (575-630 bhp)@ 1800-1900 rpm. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
Product Specs
-
Power Rating
- Minimum Power
- 575.0bhp
- Maximum Power
- 630.0bhp
- Rated Speed
- 1800-2000 rpm
- Minimum Power
- 575HP
- Maximum Power
- 630HP
- Rated Speed
- 1800-2000 rpm
-
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final, EU Stage IV nonroad emission standards. Designed to meet proposed EU Stage V nonroad emission standards.
- Emissions
- U.S. EPA Tier 4 Final, EU Stage V
-
General
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 145 mm (5.71 in)
- Stroke
- 183 mm (7.2 in)
- Displacement
- 18.1 L (1104.5 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Compression Ratio
- 16:1
- Rotation (from flywheel end)
- Counterclockwise
- Cooling System Capacity
- 26.9 L (28.4 qt)
- Lube System (refill)
- 40-74 L (42.3-78.1 qt)
- Bore
- 5.7in
- Stroke
- 7.2in
- Displacement
- 1104.5in³
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 145 mm (5.71 in)
- Stroke
- 183 mm (7.2 in)
- Displacement
- 18.1 L (1104.5 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Compression Ratio
- 16.0:1
- Rotation from Flywheel End
- Counterclockwise
- Cooling System - Capacity
- 26.9 L (28.4 qt)
- Lube System - Refill
- 40-74 L (42.3-78.1 qt)
-
Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)
- Diameter
- 330.2 mm (13 in)
- Weight
- 180-268 kg (397-590.8 lb)
-
PETU Dimensions - Tier 4 Final Only
- Volume Capacity
- 51.1qt (US)
-
Aftertreatment Dimensions
- Diameter
- 13in
- Weight
- 591lb
-
Power Unit Dimensions - Approximate
- Length
- 2172-2532 mm (85.5-99.7 in)
- Width
- 1180-1241 mm (46.5-48.9 in)
- Height
- 1912-2006 mm (75.3-79 in)
- Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
- 2113-2650 kg (4658-5842 lb)
-
Aftertreatment Dimensions - Approximate
- Width
- 762-1112 mm (30-43.8 in)
- Height
- 468-652 mm (18-25.7 in)
- Diameter
- 330.2 mm (13 in)
- Weight
- 180-268 kg (397-590.8 lb)
-
PETU Dimensions - Tier 4 Final, Stage IV Only
- Volume Capacity
- 48.4 L (51.1 qt)
- Length
- 854 mm (33.6 in)
- Width
- 287 mm (11.3 in)
- Height
- 551 mm (21.7 in)
- Weight
- 19.42 kg (42.8 lb)
Equipment
-
- Air Inlet System
-
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
-
- Control System
-
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Remote fan control
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
-
- Cooling System
-
- Thermostats and housing, vertical outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
-
- Flywheels And Flywheel Housing
-
- Choice of SAE No. 0 or SAE No. 1 flywheel housing
- Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
-
- Fuel System
-
- MEUI injection
- Primary fuel filter
- Secondary fuel filters
- Fuel transfer pump
- Electronic fuel priming
-
- Lube System
-
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
-
- Power Take Off (pto)
-
- SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
-
- General
-
- Paint: Caterpillar yellow, with optional colors available at request
-
- U.s. Epa Tier 4 Interim, Eu Stage Iiib Aftertreatment / Clean Emissions Control Equipment
-
- Cat Regeneration System
- Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- NOx Reduction System (NRS)
- Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
- Available in 12 volt or 24 volt systems
-
- U.s. Epa Tier 4 Final, Eu Stage Iv Aftertreatment/ Clean Emissions Control Equipment
-
- Cat Regeneration System
- Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- Aftertreatment Electronic Control Unit (ECU)
- NOx Reduction System (NRS)
- Pump Electronic Control Unit (PETU)
- Selective Catalytic Reduction (SCR)
- Available in 12V or 24V systems