Boyd CAT Logo

Industrial:

Cat® C13 Diesel Engine

Contact Us About This Product

Click a link to download the document:

C13 Tier 4 Diesel Engines - Highly Regulated
  • C13 Tier 4 Diesel Engines - Highly Regulated
Engine Configuration
In-Line 6, 4-Stroke-Cycle Diesel
Cooling System Capacity
18.7 L (19.8 qt)
Lube System (refill)
34 L (35.9 qt)
Length
1203-1272 mm (47.2-50.1 in)

The Cat® C13 Industrial Diesel Engine is offered in ratings ranging from 287-388 bkW (385-520 bhp) @ 1800-2100 rpm. Industries and applications powered by engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Specialty Ag Equipment, Surface Hauling Equipment, Trenchers and Underground Mining Equipment.

Product Specs

  • General

    • Engine Configuration
    In-Line 6, 4-Stroke-Cycle Diesel
    Cooling System Capacity
    18.7 L (19.8 qt)
    Lube System (refill)
    34 L (35.9 qt)
    Bore
    5.1in
    Stroke
    6.2in
    Displacement
    762.8in³
    Aspiration
    Turbocharged-Aftercooled (TA)
    Compression Ratio
    17.0:1
    Combustion System
    Direct Injection
    Rotation from Flywheel End
    Counterclockwise
    Engine Configuration
    In-Line 6

  • Engine Dimensions (Approximate. Final dimensions dependent on selected options)

    • Length
    1203-1272 mm (47.2-50.1 in)
    Width
    933-996 mm (36.74-39.2 in)
    Height
    1132-1186 mm (44.6-46.7 in)
    Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
    1143-1350 kg (2520-2976 lb)

  • Cat Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

    • Length
    1053-1077 mm (41.5-42.4 in)
    Width
    779.8-1069 mm (30.7-42.1 in)
    Height
    451.3-654 mm (17.8-25.7 in)
    Weight
    248-259 kg (547-571 lb)
    Diameter
    330.2 mm (13 in)

  • PETU Dimensions (Tier 4 Final, Stage IV Only)

    • Length
    854 mm (33.6 in)
    Width
    287 mm (11.3 in)
    Volume Capacity
    48.4 L (51.1 qt)
    Weight
    19.42 kg (42.8 lb)
    Height
    551 mm (21.7 in)

  • Power Rating

    • Minimum Power
    385HP
    Maximum Power
    520HP
    Rated Speed
    1800-2100 rpm
    Maximum Torque
    1756lb-ft @ 1400 rpm

  • Emission Standards

    • Emissions
    U.S. EPA Tier 4 Final

  • Passive Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

    • Length
    974.8 mm (38.4 in)
    Width
    958.3 mm (37.7 in)
    Height
    547.2 mm (21.5 in)
    Weight
    140 kg (308.6 lb)

  • PETU Dimensions - Tier 4 Final Only

    • Volume Capacity
    51.1qt (US)

  • Engine Dimensions - Approximate

    • Length
    50in
    Width
    39in
    Height
    45in

  • Aftertreatment Dimensions

    • Length
    42in
    Weight
    571lb

Equipment

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
    • Remote fan control
  • Cooling System
    • Vertical or RH thermostat outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels And Flywheel Housing
    • SAE No. 1 flywheel housing
    • Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
  • Fuel System
    • MEUI injection
    • Primary fuel filter
    • Secondary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
    • Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
  • Power Take Off (pto)
    • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.s. Epa Tier 4 Interim, Eu Stage Iiib Aftertreatment / Clean Emissions Control Equipment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
    • Available in 12 volt or 24 volt systems
  • U.s. Epa Tier 4 Final, Eu Stage Iv Aftertreatment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • Aftertreatment Electronic Control Unit (ECU)
    • NOx Reduction System (NRS)
    • Pump Electronic Control Unit (PETU)
    • Selective Catalytic Reduction (SCR)
    • Available in 12V or 24V systems

Request a Quote

Find a Boyd CAT
Location or Rep Near You