Diesel Generator Sets:
C18 Generator Set
Contact Us About This Product
Click a link to download the document:
- Aspiration
- Air to Air Aftercooled
- Fuel System
- Electronic unit injection
- Aspiration
- Air to Air Aftercooled
- Fuel System
- Electronic unit injection
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Product Specs
-
Engine Specifications
- Aspiration
- Air to Air Aftercooled
- Fuel System
- Electronic unit injection
- Aspiration
- Air to Air Aftercooled
- Fuel System
- Electronic unit injection
- Fuel System
- Electronic unit injection
- Bore
- 5.71in
- Stroke
- 7.2in
- Displacement
- 1106.36in³
- Engine Model
- C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
- Bore
- 145 mm (5.71 in)
- Displacement
- 18.13 L (1106.36 in3)
- Stroke
- 183 mm (7.2 in)
- Compression Ratio
- 14.5:1
- Governor Type
- Ademâ„¢A4
-
Generator Set Dimensions
- Height - Maximum
- 75in
- Length - Maximum
- 162.4in
- Width - Maximum
- 78.3in
-
Generator Set Specifications
- Duty Cycle
- Standby, Prime
- Minimum Rating
- 550 kVA
- Maximum Rating
- 715 kVA
- Voltage
- 380 to 415 Volts
- Frequency
- 50 Hz
- Speed
- 1500 rpm
- Emissions/Fuel Strategy
- Low Fuel, China Nonroad III Emis Stds
Equipment
-
- Air Inlet System
-
- Turbocharger
- Light duty air cleaner
- Aftercooler core
-
- Air Inlet
-
- Air Cleaner
-
- Control System
-
- EMCP 4.2
-
- Exhaust
-
- Exhaust flange outlet
-
- Cooling
-
- Coolant drain line with valve
- Caterpillar extended life coolant
- Fan drive, battery charging alternator drive
- Radiator and cooling fan with guard
-
- Exhaust System
-
- Stainless steel exhaust flex gaskets, raincap and SAE exhaust flange for customer use; shipped loose
-
- Fuel
-
- Secondary fuel filter
- Fuel priming pump
- Primary fuel filter with integral water separator
-
- Fuel System
-
- Standard 8 hour open set fuel tank
-
- Generator
-
- IP23 Protection
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
- Matched to the performance and output characteristics of Cat engines
-
- Generator And Attachments
-
- Segregated low voltage (AC/DC) wiring panel
- Integrated Voltage Regulator
- A frame generator - IP21 protection
- Integrated Voltage Regulator
- Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
- Power center, IP22
- Matched to the performance and output characteristics of Cat engines
-
- Power Termination
-
- Bus Bar
-
- Governing System
-
- Cat Electronic Governor (ADEM A4)
-
- Control Panel
-
- EMCP 4 Genset Controller
-
- Lube System
-
- Lubricating oil
- Oil drain valves
-
- Mounting
-
- Rubber vibration isolators
-
- Mounting System
-
- Captive linear vibration isolators between base and engine-generator. includes lifting provisions and termination points for coolant and lube oil drain lines
-
- Starting/charging
-
- 24 Volt battery with rack and cables
-
- General
-
- Engine and alternator pre-paint, Caterpillar yellow
-
- Exhaust
-
- Industrial, Residential, Critical Mufflers
-
- Air Inlet System
-
- Dual element air cleaner
- Single element air cleaner
-
- Circuit Breakers
-
- 3 Pole (IEC-100% rated) circuit breakers - Motorised
- 4 Pole (IEC-100% rated) circuit breakers - Motorised
- Circuit breaker (IEC) auxiliary contacts
- Pad-lockable circuit breaker device
- 3 Pole (IEC-100% rated) circuit breakers - Package mounted
- 4 Pole (IEC-100% rated) circuit breakers - Package mounted
- Power terminal strip
- Shunt trip for IEC breaker
-
- Generator
-
- Anti-condensation heater
- Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
- Oversize and premium generators
-
- Power Termination
-
- Circuit breakers, IEC compliant
- Circuit breakers, UL listed
-
- Control Panels
-
- Local & remote annunciator modules
- Load share module
- Remote monitoring software
- EMCP (4.2) (4.3) (4.4)
- Digital I/O module
-
- Control System
-
- Oil temperature displays
- EMCP 4.4
- Volt free contact
- Protective devices: Earth fault relay - earth leageage ground fault relay - Overload shutdown via breaker - Low fuel level alarm - Low fuel level shutdown - high fuel level alarm - Fuel level sensor
- Local alarm modules
- Remote annunciator modules
- Local alarm horn
-
- Cooling System
-
- Low coolant temperature alarm
- Radiator duct flange
-
- Starting/charging
-
- Oversize batteries
- Jacket water heater
- Battery chargers
- Heavy-duty starting system
- Charging alternator
-
- Enclosures
-
- Sound attenuated enclosures
-
- Exhaust System
-
- Manifold and Turbocharger guard
- Engine mounted muffler
- 8 and 10 inch elbow kits
- 8 and 10 inch GP flanges
- 10, 25 and 35 end in / end out Mufflers
-
- Fuel System
-
- Integral - Duel wall fuel tank base
- Manual fuel transfer pump
- Fuel transfer system
-
- Generator And Attachments
-
- LC frame generator
- Permanent magnet excitation
- LC frame oversize generators
- Space heaters
- A frame oversize generator
- A frame CIP generator
- Ingress protection
- LC frame CIP generator
-
- General
-
- Single or dual wall integral fuel tanks
- UL 2200 package
- Enclosures: sound attenuated, weather protective
- EU Certificate of Conformance (CE)
- Integral & sub-base UL listed dual wall fuel tanks
- Narrow, Wide or Skid Base
- The following options are based on regional and product configuration:
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- EEC Declaration of Conformity
- CSA Certification
- Sound attenuated, weather protective or high ambient weather protective enclosure
- Automatic transfer switches (ATS)
- Single or dual wall sub-base fuel tanks
-
- Lube System
-
- Manual sump pump
-
- Starting And Charging
-
- Jacket water heaters
- 5 Amp battery charger
- Battery disconnect switch