Diesel Generator Sets:
3516E Low Voltage Generator Set
Contact Us About This Product
Click a link to download the document:
- Duty Cycle
- Standby, Mission Critical, Prime
- Stroke
- 8.47 in
- Displacement
- 4765 in³
- Dry Weight - Genset (maximum)
- 44930 lb
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Product Specs
-
Generator Set Specifications
- Duty Cycle
- Standby, Mission Critical, Prime
- Minimum Rating
- 2500 eKW
- Maximum Rating
- 3000 ekW
- Voltage
- 416 to 13,800 Volts
- Frequency
- 60 Hz
- Speed
- 1800 rpm
- Emissions/Fuel Strategy
- Tier 2
-
Engine Specifications
- Stroke
- 8.47in
- Displacement
- 4765in³
- Engine Model
- 3516E, V-16, 4-Stroke, Water-Cooled Diesel
- Compression Ratio
- 13.9:1 / 14.3:1
- Aspiration
- ATAAC
- Governor Type
- Adem™ A5
- Fuel System
- MEUI
- Bore
- 6.69in
- Stroke - HD
- 8.46in
- Fuel System
- 8.46in
-
Generator Set Dimensions
- Dry Weight - Genset (maximum)
- 44930lb
- Height - Maximum
- 143in
- Length - Maximum
- 304in
- Width - Maximum
- 113in
Equipment
-
- Air Inlet System
-
- Single element canister type with service indicator
- Air cleaner
-
- Cooling
-
- Package mounted radiator
-
- Exhaust
-
- Exhaust flange outlet
-
- Fuel
-
- Primary fuel filter with integral water separator
- Fuel priming pump
-
- Generator
-
- IP23 Protection
- Matched to the performance and output characteristics of Cat engines
-
- Power Termination
-
- Busbar
-
- Starting/charging
-
- Heavy-duty starting system
- Charging alternator
-
- Control Panel
-
- Over / under voltage (27/59)
- Emergency stop pushbutton
- Speed adjust
- Accessory module data link
- Generator phase sequence
- Panel Lights
- Alarm acknowledge
- Generator mounted - rear facing
- kW (per phase, average & percent)
- Engine cool-down timer
- Communications:
- High coolant temperature
- Warning / shutdown with common LED indication of shutdowns for:
- Overcurrent (50/51)
- Amps (per phase & average)
- Oil pressure (psi, kPa or bar)
- Serial annunciator module data link
- 24 Volt DC operation
- EMCP 4.2B controller includes:
- DC volts
- Reverse reactive power (kVAr) (32RV)
- 6 Programmable digital inputs
- 2 Programmable relay outputs (Form C)
- Frequency (Hz)
- Customer data link (Modbus RTU)
- Power Factor (per phase & average)
- kW-hr (total)
- EMCP 4.2B
- Lamp test
- kVA (per phase, average & percent)
- kVAr-hr (total)
- Coolant temperature
- Text alarm / event descriptions
- Over / under frequency (81 o/u)
- kVAr (per phase, average & percent)
- 4 Programmable relay outputs (Form A)
- Low coolant level
- True RMS AC metering, 3-phase, +/-2% accuracy
- Failure to start (overcrank)
- Operating hours
- Low coolant temperature
- 2 Programmable digital outputs
- Low oil pressure
- Controls:
- Digital indication for:
- Environmental sealed front face
- Overspeed
- Volts (L-L & L-N)
- Reverse Power (kW) (32)
- Engine cycle crank
- Programmable protective relaying functions:
-
- Undercarriage
-
- Track master link
-
- Cooling System
-
- Fan and belt guards
- JWAC
- Radiator fan and fan drive
- Coolant level sensors
- Caterpillar extended life coolant
- Coolant drain line with valve
-
- Exhaust System
-
- Flanged faced outlet(s)
- Dry exhaust manifold
-
- Fuel System
-
- Fuel cooler; not included with packages without radiator
- Fuel priming pump
- Secondary fuel filters
- Flexible fuel lines - shipped loose
-
- Generators And Attachments
-
- Class H insulation, Class F temperature rise at 40C ambient (105C prime/130C standby)
- NEMA standard hole pattern
- Anti condensation space heater
- Permanent magnet
- Form wound
- 3 Phase brushless, salient pole
- 6 Lead
- Winding temperature detectors
- Right side extension terminal box, bus bar connections, top mounted, bottom cable entry
-
- Governing System
-
- ADEM III
-
- Literature
-
- English
-
- Lube System
-
- Gear type lube oil pump
- Integral lube oil cooler
- Fumes disposal
- Oil drain lines and valve
- Oil filter, filler and dipstick
- Lubricating oil
-
- Mounting System
-
- Rubber anti-vibration mounts (shipped loose)
- Rails - engine/generator/radiator mounting
-
- Starting / Charging System
-
- 45 Amp charging alternator
- Battery and battery rack w/cables
- Battery disconnect switch
- 24 Volt electric starting motor
-
- General
-
- Right hand servicing
- Paint: Caterpillar yellow with high gloss black rails & radiator
- SAE standard rotation
- Flywheel and flywheel housing-SAE No. 00
-
- Air Inlet System
-
- Air inlet protection
- Remote air inlet adapters
- Heavy duty air cleaners
- Dual element air cleaners
-
- Circuit Breakers
-
- 2000, 2500, 3200, 4000 Amp, 4 Pole, IEC-Rated Circuit Breakers
- Circuit breaker harnesses
- Masterpact breaker connections
- P Frame breaker connections
- 2000, 2500, 3200, 4000, 5000 Amp, 3 Pole, IEC Rated Circuit Breakers
- Busbar connections
- R Frame breaker connections
- Cable entry options
- 1600, 2000, 2500, 3000, 4000, 5000 Amp, 3 Pole, UL-100% Rated Circuit Breakers
- Optional busbar power connections
-
- Power Termination
-
- Circuit breakers, IEC compliant
-
- Control Panel
-
- Voltage raise / lower switch
- PC monitoring (Remote and local)
- Generator temperature monitoring
- Remote speed adjust
- Annunciator modules
- EMCP 4.3, EMCP 4.4
- Vandal proof panel door
- Auxiliary box
- Customer interface options
- Ground
- Language options
- Load share module options
- Mounting group - External box clips
-
- Cooling System
-
- Optional Serpentine radiators
- Optional ATAAC radiators
- Water level switch gauges
- Expansion tanks
-
- Exhaust System
-
- Flexible fittings
- Y Adapters
- Elbows
- Mufflers
- Flanges
- Flanges and exhaust fittings
-
- Fuel System
-
- Duplex fuel filters
- Primary fuel filters
-
- Generators And Attachments
-
- Differential current transformers - 8.7 and 15 kV class
- Alternator air cleaners
-
- Instrumentation
-
- Pyrometer and thermocouples
-
- Lube System
-
- Manual prelube pum
- Electric prelube pump
- Oil level regulator
- Lube oil in standard sump
-
- Mounting System
-
- Spring type vibration isolators
- IBC seismic vibration isolators NORAD
- Puck style low efficiency lsolators
-
- Power Connections
-
- Neutral ground connections
- 2700 & 3000 Frame
- Grounding groups
-
- Special Tests / Reports
-
- Fuel consumption test
- Torsional vibration analysis
- Standard engine test charge
- IBC certifications
- Generator set consumption test
- Generator set test report
- PGS test report @ 1.0 power factor
- PGS test report @ 0.8 power factor
-
- Starting / Charging System
-
- Engine barring group
- 10, 20, 35 and 50 Amp battery chargers
- Starter covers
- Jacket water heaters
- 24 Volt battery set - Dry
- Electric starting motors
- Air starting motors
- Air pressure regulator
-
- General
-
- US aid emblem
- Special paint colors