Diesel Generator Sets:
3516B Generator Set
Contact Us About This Product
Click a link to download the document:
- Height - Maximum
- 98.2 in
- Length - Maximum
- 251.4 in
- Width - Maximum
- 90 in
- Duty Cycle
- Standby, Mission Critical, Prime, Continuous
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Product Specs
-
Generator Set Dimensions
- Height - Maximum
- 98.2in
- Length - Maximum
- 251.4in
- Width - Maximum
- 90in
- Dry Weight - Genset (maximum)
- 31270lb
-
Generator Set Specifications
- Duty Cycle
- Standby, Mission Critical, Prime, Continuous
- Minimum Rating
- 1640 ekW
- Maximum Rating
- 2250 ekW
- Voltage
- 380 to 13800 Volts
- Frequency
- 60 Hz
- Speed
- 1800 rpm
- Emissions/Fuel Strategy
- Low Fuel, Low Emissions
-
Engine Specifications
- Stroke
- 7.48in
- Displacement
- 4210.64in
- Engine Model
- 3516B TA, V-16, 4-Stroke Water-Cooled Diesel
- Compression Ratio
- 14.0:1 Std 15.5:1 HD
- Aspiration
- TA
- Governor Type
- Adem™3
- Fuel System
- Electronic unit injection
- Bore
- 6.69in
- Displacement - HD
- 4764.73in³
- Displacement - Std
- 4210.64in³
- Stroke - HD
- 8.46in
- Stroke - Standard
- 7.48in
- Fuel System
- 7.48in
Equipment
-
- Air Inlet System
-
- Air cleaner; single element canister type
-
- Cooling
-
- Package mounted radiator
-
- Exhaust
-
- Exhaust flange outlet
-
- Fuel
-
- Primary fuel filter with integral water separator
- Secondary fuel filter
- Fuel priming pump
-
- Generator
-
- IP23 Protection
- Matched to the performance and output characteristics of Cat engines
-
- Power Termination
-
- Busbar
-
- Control Panel
-
- EMCP 4 genset controller
-
- General
-
- Paint - Caterpillar Yellow except rails and radiators gloss black
-
- Control Panels
-
- Speed adjust
- Text alarm / event descriptions
- Generator set packages include Caterpillar' s Voltage Regulator
- Auto / start / stop control
- 24 Volt DC operation
- EMCP 4.2B
- Generator mounted - Rear facing
- Controls:
- Environmental sealed front face
- Engine cool-down timer
- Emergency stop pushbutton
- Limiter and exciter diode monitor
- Engine cycle crank
- Lamp test
- Alarm acknowledge
- Customizable screens
- PLC functionality
- Load histogram feature
- 0 True RMS AC metering, 3-phase, +/-2% accuracy
- Operating hours
- Digital indication for:
- DC volts
- RPM
- Coolant temperature
- Amps (per phase & average)
- Oil pressure (psi, kPa or bar)
- Volts (L-L & L-N)
- Frequency (Hz)
- Power factor (per phase & average)
- kW (per phase, average & percent)
- High coolant temperature
- Low oil pressure
- Warning / shutdown with common LED indication of shutdowns for01/10/2018:
- kVAr (per phase, average & percent)
- kVA (per phase, average & percent)
- kVAr (per phase, average & percent)
- Emergency stop
- Overspeed
- Failure to start (overcrank)
- Programmable protective relaying functions:
- Low coolant temperature
- Generator phase sequence
- Low coolant level
- 1 Programmable digital outputs
- Gear type lube oil pump
- Battery disconnect switch
- Caterpillar yellow with high gloss black rails and radiator
- NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby)
- Medium Voltage: Form wound - Permanent magnet - Winding temperature detectors - NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby) - Busbar connections, right side extension box, bottom cable entry - NEMA standard hole pattern
- Fumes disposal
- Permanent magnet
- NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby)
- Permanent magnet
- NEMA standard hole pattern
- Reverse reactive power (kVAr) (32RV)
- Over / under voltage (27/59)
- NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby)
- Permanent magnet
- Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
- Permanent magnet
- SAE Standard rotation
- Internal excitation
- Flexible fuel lines - shipped loose
- IVR includes reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, min / max exciter
- Busbar connections, right side extension box, bottom cable entry
- Medium Voltage:
- Communications:
- NEMA standard hole pattern
- Lubricating oil
- Oil drain lines and valve
- 3 Phase brushless, salient pole
- 24 Volt electric starting motor
- 6 Customer programmable digital inputs
- Dry exhaust manifold
- Accessory module data link
- ADEM A3
- Form wound
- ATAAC - 3516E Package Radiators shipped installed
- Busbar connections, top center mounted, top cable entry
- High Voltage:
- 4 Programmable relay outputs (Form A)
- Anti Condensation Space Heater
- NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby)
- Controls: Speed adjust - Auto / start / stop control - Engine cool-down timer - Engine cycle crank - Alarm acknowledge - Lamp test - Load histogram feature - PLC functionality - Customizable screens -0 True RMS AC metering, 3-phase, +/-2% accuracy
- NEMA standard hole pattern
- 45 Amp charging alternator
- 3 Analog inputs
- Random wound
- Anti-vibration mounts (shipped loose)
- Cat Connect
- Oil filter, filler and dipstick
- Rails - engine / generator / radiator mounting
- Customer data link (Modbus RTU)
- Flywheel and flywheel housing - SAE No. 00
- English
- Busbar connections, right side extension box, bottom cable entry
- Serial annunciator module data link
- Integral lube oil cool
- Certified standard PGS provided
- Winding temperature detectors
- 1 Programmable relay outputs (Form C)
- Reverse power (kW) (32)
- Form wound - Permanent magnet
- Right hand servicing
- Overcurrent (50/51)
- 6 Lead
- Flanged faced outlet(s)
- Low Voltage:
- Number of I/O varies on options selected:
- Battery and battery rack w/cables
- Over / under frequency (81 o/u)
- Fuel cooler; not included with packages without radiator
- Busbar connections, right side extension box, bottom cable entry
- Rubber anti-vibration mounts (shipped loose)
- NEMA standard hole pattern
-
- Control System
-
- EMCP 4.3, EMCP 4.4
-
- Air Inlet System
-
- Single element filter
- Dual element air cleaner
-
- Exhaust
-
- Exhaust mufflers
-
- Generator
-
- Permanent magnet excitation (PMG)
- Internal excitation (IE)
- Anti-condensation heater
- Oversize and premium generators
-
- Cooling System
-
- Water level switch gauges
- Standard ambient radiators
- Coolant
- Standard ambient ATAAC radiators
- Optional installed ATAAC radiators
- Air inlet protection including air shut off magnetic switch
- Optional installed radiator
-
- Power Termination
-
- Circuit breakers, IEC compliant
- Circuit breakers, UL listed
-
- Control Panels
-
- Generator temperature monitoring & protection
- Remote monitoring software
- Load share module
- Digital I/O module
-
- Exhaust System
-
- Exhaust Offset
- Flanges
- Elbows
- Y adapters
- Flange and exhaust expanders
- Clean emission parets
- Mufflers
- Flexible fittings
-
- Fuel System
-
- Primary fuel filter
-
- General
-
- Special paint
- US aid emblem
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- EEC Declaration of Conformity
- Integral & sub-base fuel tanks
- Enclosures: sound attenuated, weather protective
- Integral & sub-base UL listed dual wall fuel tanks
- EU Certificate of Conformance (CE)
- The following options are based on regional and product configuration:
- Automatic transfer switches (ATS)
- UL 2200 package
-
- Mounting
-
- Rubber anti-vibration mounts
- Spring-type vibration isolator
- IBC isolators
-
- Generators And Attachments
-
- Generator conversions IE to PM
- 380, 440, 480, 600 Volts, 3 phase, 1800 rpm, RW, PM, No. of leads: 6, Picth: 0.6667 - 1600 Frame
- 380, 440, 480, 600 Volts, 3 phase, 1800 rpm, RW, IE, No. of leads: 6, Picth: 0.6667 - 1600 Frame
- 380, 416, 440, 480, 600, 2400, 4160 Volts, 3 phase, 1800 rpm, RW, PM, No. of leads: 6, Picth: 0.6667 - 1600 and 1800 Frames
- Alternator air cleaner
- Space heater
-
- Intrumentation
-
- Pyrometer and thermocouples
-
- Lube System
-
- Prelube pump groups
- Oil lever regulator
- Lube oil
-
- Starting/charging
-
- Battery chargers
- Air starting motor with control and silencer
- Heavy-duty starting system
- Oversize batteries
- Charging alternator
-
- Crankcase Systems
-
- Crankcase protection group: No explosion relief valves; Explosion relief valves
- Crankcase ventilation system
-
- Mounting System
-
- Spring type vibration isolators
- IBC vibration isolators
- Puck style low efficiency isolators
-
- Power Connections
-
- Neutral ground connections
- Center post busbars
- Right, left side and rear power connections
- Grounding groups
-
- Special Tests / Reports
-
- Standard engine test charge
- IBC certification
- Special package tests: PGS test report @ 1.0 and 0.8 power factors
- Generator set test report
- CSA certification
- Torsional vibration analysis TVA report
- Fuel consumption test
-
- Starting / Charging Sytem
-
- Jacket water heaters