Diesel Fire Pumps:

Cat® 3516 Fire Pump

3516 Fire Pump Diesel Fire Pumps - Highly & Lesser Regulated
Minimum Power
1900.0 bhp
Maximum Power
1985.0 bhp
Emissions
Non-Certified. Available for global non-regulated areas. Not FM Approved. Not UL Listed
Rated Speed
1460-1750 rpm

Cat® 3516 Industrial Diesel Fire Pump Engines, with ratings: 1417-1480 kW (1900-1985 hp) @ 1460-1750 rpm, are non-certified, not FM Approved and not UL Listed. They are available for global non-regulated areas. Starting on demand is a must for a fire pump engine – always. Cat® fire pump engines have a reputation for reliable starts and long efficient service. The Cat line of fire engine pumps covers a wide range of installations.



Product Specs

  • Power Rating

  • Minimum Power
    1900.0bhp
    Maximum Power
    1985.0bhp
    Rated Speed
    1460-1750 rpm
    Minimum Power
    1900HP
    Maximum Power
    1985HP
    Rated Speed
    1460-1750 rpm
  • Emission Standards

  • Emissions
    Non-Certified. Available for global non-regulated areas. Not FM Approved. Not UL Listed
    Emissions
    Non-Certified. Available for global non-regulated areas. Not FM Approved. Not UL Listed
  • General

  • Aspiration
    Turbocharged Aftercooled (TA)
    Compression Ratio
    13.0:1
    Rotation (from flywheel end)
    Counterclockwise
    Aspiration
    Turbocharged Aftercooled (TA)
    Compression Ratio
    13.0:1
    Rotation from Flywheel End
    Counterclockwise
    Engine Configuration
    V-16, 4-Stroke-Cycle Diesel
    Bore
    170 mm (6.7 in)
    Stroke
    190 mm (7.5 in)
    Displacement
    69 L (4210 in³)
    Bore
    6.7in
    Stroke
    7.5in
    Displacement
    4210in³
  • Engine Dimensions - Approximate

  • Height
    1902.4 mm (74.9 in)
    Length
    3730.4 mm (146.9 in)
    Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
    8074 kg (17800 lb)
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    17800lb
    Length
    146.9in
    Height
    74.9in

Equipment

  • Air Inlet System
    • Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
    • Turbocharger, rear mounted
    • Jacket water aftercooled
  • Control System
    • Charging alternator 24 volt, 35 amp
    • Governor, RH, 3161 with self contained synthetic oil sump
    • Air-fuel ratio control
    • Mechanical speed control, without torque control
    • Governor control
    • Positive locking
  • Cooling System
    • Thermostats and housing
    • Jacket water pump, centrifugal
  • Exhaust System
    • Exhaust manifold, dry
  • Flywheels And Flywheel Housing
    • SAE No. 0 flywheel
    • 151 flywheel teeth
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Fuel filter, with service indicators, cartridge type with RH service
    • Fuel transfer pump
  • Instrumentation
    • Instrument Panel, RH
    • Engine oil pressure gauge
    • Fuel pressure gauge
    • Oil filter differential gauge
    • Jacket water temperature gauge
    • Service meter, electric
    • Tachometer
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filler
    • Oil dipstick
    • Oil pump
    • Oil filter, cartridge type with RH service
    • Shallow oil pan
    • Fumes disposal (not installed)
  • Mounting System
    • Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
    • Included on selected top level engines
  • Power Take Off
    • Accessory drive, upper RH
    • Front housing, single sided
  • Protection System
    • Junction box
    • Manual shutoff, RH
    • Safety shutoff protection, energized to shutdown
    • Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
    • Water temperature
    • Overspeed
    • 3161 governor solenoid energized to shutdown
  • Starting System
    • Starting switch
  • General
    • Vibration damper
    • Lifting eyes
    • Paint: Caterpillar yellow, with optional colors available at request

Request a Quote

Find a Boyd CAT
Location or Rep Near You