Marine Generator Sets:

Cat C280-6 Marine Generator Set

C280-6
Minimum Rating
1760 ekW (2200 kVA)
Maximum Rating
1820 ekW (2275 kVA)
Frequency
50 Hz or 60 Hz
Speed
1000 rpm (50 hz) or 900 rpm (60 hz)


Product Specs

  • Generator Set Specifications

  • Minimum Rating
    1760 ekW (2200 kVA)
    Maximum Rating
    1820 ekW (2275 kVA)
    Frequency
    50 Hz or 60 Hz
    Speed
    1000 rpm (50 hz) or 900 rpm (60 hz)
    Minimum Rating
    1760 ekW (2200 kVA)
    Maximum Rating
    1820 ekW (2275 kVA)
    Frequency
    50 Hz or 60 Hz
    Speed
    1000 rpm (50 hz) or 900 rpm (60 hz)
    Emissions/Fuel Strategy
    EPA Tier 2, IMO II
  • Generator Set Configurations

  • Emissions/Fuel Strategy
    EPA Tier 2, IMO II
  • Engine Specifications

  • Engine Model
    In-line 6, 4-Stroke-Cycle Diesel
    Aspiration
    Turbocharged-Aftercooled
    Bore
    11.0in
    Stroke
    11.8in
    Displacement
    6773.0in3
    Governor Type
    Electronic
    Aspiration
    Turbocharged-Aftercooled
    Bore
    11in
    Stroke
    11.8in
    Displacement
    6773in³
    Governor Type
    Electronic
    Engine Model
    In-line 6, 4-Stroke-Cycle Diesel
    Fuel System
    EUI
    Compression Ratio 50 Hz
    13.1
    Compression Ratio 60 Hz
    13:1
  • Generator Set Dimensions

  • Length
    280.3in
    Width
    77.2in
    Height
    154.9in
    Weight (Estimated)
    18000.0lb
    Length
    280.3in
    Width
    77.2in
    Height
    154.9in
    Weight - Estimated
    18000lb

Equipment

  • Air Inlet System
    • Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
  • Control System
    • Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
  • Cooling System
    • Engine coolant water drains
  • Exhaust System
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
  • Lube Oil System
    • Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves
  • General
    • Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature

Request a Quote

Find a Boyd CAT
Location or Rep Near You