Marine Generator Sets:

Cat C280-16 Marine Generator Set

Minimum Rating
4700 ekW (5875 kVA)
Maximum Rating
4840 ekW (6050 kVA)
Frequency
50 Hz or 60 Hz
Speed
1000 rpm (50 hz) or 900 rpm (60 hz)


Product Specs

  • Generator Set Specifications

  • Minimum Rating
    4700 ekW (5875 kVA)
    Maximum Rating
    4840 ekW (6050 kVA)
    Frequency
    50 Hz or 60 Hz
    Speed
    1000 rpm (50 hz) or 900 rpm (60 hz)
    Minimum Rating
    4700 ekW (5875 kVA)
    Maximum Rating
    4840 ekW (6050 kVA)
    Frequency
    50 Hz or 60 Hz
    Speed
    1000 rpm (50 hz) or 900 rpm (60 hz)
    Emissions/Fuel Strategy
    EPA Tier 2, IMO II
  • Generator Set Configurations

  • Emissions/Fuel Strategy
    EPA Tier 2, IMO II
  • Engine Specifications

  • Engine Model
    Vee 16, 4-Stroke-Cycle Diesel
    Aspiration
    Turbocharged-Aftercooled
    Bore
    11.0in
    Stroke
    11.8in
    Displacement
    18062.0in3
    Governor Type
    Electronic
    Aspiration
    Turbocharged-Aftercooled
    Bore
    11in
    Stroke
    11.8in
    Displacement
    18062in³
    Governor Type
    Electronic
    Engine Model
    Vee 16, 4-Stroke-Cycle Diesel
    Fuel System
    EUI
    Compression Ratio 50 Hz
    13.1
    Compression Ratio 60 Hz
    13:1
  • Generator Set Dimensions

  • Length
    366.7in
    Width
    78.3in
    Height
    164.1in
    Weight
    31000 kg/ 68343 lb (engine dry weight), 18145 kg/ 40000 lb (generator weight)
    Length
    366.7in
    Width
    78.3in
    Height
    164.1in
    Weight
    31000 kg/ 68343 lb (engine dry weight), 18145 kg/ 40000 lb (generator weight)

Equipment

  • Air Inlet System
    • Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
  • Control System
    • Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
  • Cooling System
    • Engine coolant water drains
  • Exhaust System
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
  • Lube Oil System
    • Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves
  • General
    • Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature

Request a Quote

Find a Boyd CAT
Location or Rep Near You