Marine Generator Sets:

C18 (SRMP) Marine Generator Set

Minimum Rating
260 ekW (325 kVA)
Maximum Rating
565 ekW (706 kVA)
Frequency
50 hz
Speed
50 Hz - 1500 rpm, 60 Hz - 1800 rpm

The C18 SRMP is the latest generator and brings commonality with our petroleum products as well as interfacing improvements. We have also taken this opportunity to add new price list options. All engine ratings and emissions certifications are the same, however we have been able to increase the power output of the generator for 12 of the 14 ratings.



Product Specs

  • Generator Set Specifications

  • Minimum Rating
    260 ekW (325 kVA)
    Maximum Rating
    565 ekW (706 kVA)
    Frequency
    50 hz
    Speed
    50 Hz - 1500 rpm, 60 Hz - 1800 rpm
    Minimum Rating
    260 ekW (325 kVA)
    Maximum Rating
    565 ekW (706 kVA)
    Frequency
    50 hz
    Speed
    50 Hz - 1500 rpm, 60 Hz - 1800 rpm
  • Engine Specifications

  • Configuration
    In-line 6, 4-Stroke-Cycle Diesel
    Aspiration
    Turbocharged - aftercooled
    Bore
    5.7in
    Stroke
    7.2in
    Fuel System
    MEUI
    Configuration
    In-line 6, 4-Stroke-Cycle Diesel
    Aspiration
    Turbocharged - aftercooled
    Bore
    5.7in
    Stroke
    7.2in
  • Generator Set Dimensions (Keel and Hex Cooled)

  • Length
    119.6in
    Height
    64.9in
  • Generator Set Dimensions (Radiator Cooled)

  • Length
    55.6in
    Height
    94.8in
  • Generator Set Configurations

  • Emissions
    EPA Tier 3, IMO II, EU IW
  • Generator Specifications

  • Excitation
    SRMP
    Insulation
    Class H
    IP Rating
    IP23 (standard), IP 44 (optional)
    Voltage Regulator
    CDVR (Digital Voltage)
  • Generator Set Dimensions - Keel and Hex Cooled

  • Width
    55.6in
    Weight - Approximate
    9747lb
    Height
    64.9in
    Length
    119.6in
  • Generator Set Dimensions - Radiator Cooled

  • Width
    66.9in
    Weight - Approximate
    13396lb
    Height
    94.8in
    Length
    55.6in

Equipment

  • Air Inlet System
    • Separate circuit after-cooled (SCAC)
    • Heavy-duty inlet air filter
  • Cooling System
    • SCAC pump, gear driven, for HEX cooled engines only
    • Jacket water pump, gear driven
    • SCAC and JW shunt tanks for maintaining proper pump inlet pressures
  • Exhaust System
    • Water-cooled exhaust manifold & turbocharger
    • Round flanged exhaust outlet
  • Fuel System
    • Hybrid fuel lines
    • MEUI fuel system
    • Fuel filter, front service
    • Fuel transfer and priming pumps
  • Lube System
    • Center sump oil pan, deep
    • Front and top service oil filler locations
    • Front service dipstick
  • Mounting System
    • Vibration Isolators
    • Formed C-channel rails
  • Control System
    • Electronic fuel/air ratio control
    • SRMP permanent magnet 12-lead generator
    • Digital voltage regulator
    • Class H insulation, Class F temperature rise, IP23 protection
  • Exhaust System
    • Dry Elbows
    • Water-Cooled Elbows
    • Flexible Fitting
    • Flange
    • Muffler
    • Muffler, Spark Arresting
    • Fumes disposal (closed system)
  • Air Inlet System
    • Air Inlet Adapter
  • Charging System
    • Battery Chargers 10 amp
    • Battery sets: 24V 950-1300 CCA
    • Charging alternator 24V 105 amp
  • Control System
    • Caterpillar alarm and protection
    • EMCP 4.2 control panel
    • MGCP III B control panel
  • Fuel System
    • Duplex fuel filter – front service
    • Fuel cooler
    • Primary fuel/water separator
  • Instrumentation
    • Generator service side - LH, RH
    • Generator terminal box extension
    • Load sharing module (option for type approved module)
  • Lube System
    • Spare pump kits
    • Duplex oil filter – front service
    • Manual sump pump
  • Mounting System
    • Vibration Isolators
  • Protection System
    • Generator protection - IP44
  • Starting System
    • Starting motors - electric and/or air
    • Jacket water heaters

Request a Quote

Find a Boyd CAT
Location or Rep Near You