Industrial:
Cat® C3.6 Diesel Engine
Contact Us About This Product
Click a link to download the document:
- Engine Configuration
- In-Line 4, 4-Stroke-Cycle Diesel
- Cooling System Capacity
- 4 L (1.06 qt)
- DOC Length
- TBA
- DOC Weight
- TBA
The Cat® C3.6 Industrial Diesel Engines offer the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 100 bkW (134 bhp) @ 2200 rpm. The C3.6 is designed to meet the needs of many industries and applications, including agricultural tractors, aircraft ground support, bore/drill rigs, chippers/grinders, compactors/rollers, compressors, forestry, irrigation equipment, material handling, mining, earthmoving equipment, paving equipment, pumps, fruit harvesters equipment, turf and underground mining equipment.
Product Specs
-
General
- Engine Configuration
- In-Line 4, 4-Stroke-Cycle Diesel
- Cooling System Capacity
- 4 L (1.06 qt)
- Engine Configuration
- In-Line 4
- Bore
- 98 mm (3.9 in)
- Stroke
- 120 mm (4.7 in)
- Displacement
- 3.6 L (220 in³)
- Cooling System - Capacity
- 4 L (1.06 qt)
- Bore
- 3.9in
- Stroke
- 4.7in
- Displacement
- 220in³
- Aspiration
- Turbocharged-Aftercooled (TA)
- Compression Ratio
- 17.0:1
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
-
Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)
- DOC Length
- TBA
- DOC Weight
- TBA
- DOC Diameter
- TBA
- SCR Weight
- TBA
- SCR Diameter
- TBA
-
Aftertreatment Dimensions - Approximate
- DOC Diameter
- TBA
- DOC Length
- TBA
- DOC Weight
- TBA
- SCR Diameter
- TBA
- SCR Weight
- TBA
- SCR Length
- TBA
-
Engine Dimensions - Approximate
- Height
- 776 mm (30.6 in)
- Length
- 667 mm (26.3 in)
- Width
- 569 mm (22.4 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 840lb
- Length
- 26.3in
- Width
- 22.2in
- Height
- 31in
- Dry Weight - Basic Operating Engine Without Optional Attachments
- 275 kg (606 lbs)
-
Power Rating
- Maximum Torque
- 406lb-ft @ 1500 rpm
- Minimum Power
- 74HP
- Maximum Power
- 134HP
- Rated Speed
- 2000-2400 rpm
-
Emission Standards
- Emissions
- U.S. EPA & CARB Tier 4 Final, EU Stage V
-
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 667 mm (26.3 in)
- Width
- 569 mm (22.4 in)
- Height
- 776 mm (30.6 in)
Equipment
-
- Control System
-
- Starter motor (12V or 24V)
- Alternator (12V or 24V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939
-
- Flywheels And Flywheel Housing
-
- Flywheel housings – SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
-
- Fuel System
-
- Fuel filter – preconnected but chassis mounted
- With water sensor
-
- Lube System
-
- Lubricating oil filters
- High incline oil pan – 35° continuous in all directions
-
- General
-
- Cold start capability to -20° C (-4° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
-
- U.s. Epa Tier 4 Final, Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
-
- Diesel Oxidation Catalyst (DOC)
- Selective Catalytic Reduction (SCR)
- SCR Auxiliaries