Industrial:
Cat® C11 Industrial Power Unit
Contact Us About This Product
Click a link to download the document:
- Minimum Rating
- 325.0 bhp
- Maximum Rating
- 385.0 bhp
- Emissions
- China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
- Rated Speed
- 1800-2100 rpm
The Cat® C11 Industrial Power Unit is offered in ratings ranging from 242-287 bkW (325-350 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent or EU Stage IIIA equivalent emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
Product Specs
-
Power Rating
- Minimum Rating
- 325.0bhp
- Maximum Rating
- 385.0bhp
- Rated Speed
- 1800-2100 rpm
- Minimum Rating
- 325BHP
- Maximum Rating
- 385BHP
- Rated Speed
- 1800-2100 rpm
- Maximum Power
- 385HP
- Rated Speed
- 1800-2100 rpm
- Minimum Power
- 325HP
-
Emission Standards
- Emissions
- China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
- Emissions
- China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
- Emissions
- China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
-
General
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 130 mm (5.1 in)
- Stroke
- 140 mm (5.5 in)
- Displacement
- 11 L (677 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Compression Ratio
- 17.2:1
- Rotation (from flywheel end)
- Counterclockwise
- Cooling System Capacity
- 14.2 L (15 qt)
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 130 mm (5.1 in)
- Stroke
- 140 mm (5.5 in)
- Displacement
- 11 L (677 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Compression Ratio
- 17.2:1
- Rotation from Flywheel End
- Counterclockwise
- Cooling System - Capacity
- 14.2 L (15 qt)
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 5.1in
- Stroke
- 5.5in
- Displacement
- 677in³
- Compression Ratio
- 17.2:1
- Aspiration
- Turbocharged Aftercooled (TA)
- Rotation from Flywheel End
- Counterclockwise
-
Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 1203 mm (47.4 in)
- Width
- 1054 mm (41.5 in)
- Height
- 1186 mm (46.7 in)
-
Power Unit Dimensions - Approximate
- Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
- 1692 kg (3730 lb)
- Height
- 1186 mm (46.7 in)
- Length
- 1203 mm (47.4 in)
- Width
- 1054 mm (41.5 in)
-
Power Unit Dimensions
- Weight
- 3730lb
Equipment
-
- Air Inlet System
-
- Turbocharged
- Air-to-Air Aftercooled
-
- Control System
-
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
-
- Cooling System
-
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
-
- Exhaust System
-
- Exhaust manifold, dry
- Optional exhaust outlet
-
- Flywheels And Flywheel Housing
-
- SAE No. 1 flywheel housing
-
- Fuel System
-
- MEUI injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
-
- Lube System
-
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
-
- General
-
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request