Industrial:

Cat® 3516C Industrial Diesel Engine

Minimum Power
2100 bhp
Maximum Power
2100 bhp
Emissions
U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
Rated Speed
1750 rpm

The Cat® 3516C is offered at 1506 bkW (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. It offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps.



Product Specs

  • Power Rating

  • Minimum Power
    2100bhp
    Maximum Power
    2100bhp
    Rated Speed
    1750 rpm
    Minimum Power
    2100BHP
    Maximum Power
    2100BHP
    Rated Speed
    1750 rpm
    Maximum Power
    2100HP
    Maximum Torque
    7563lb-ft @ 1300 rpm
    Rated Speed
    1750 rpm
    Minimum Power
    2100HP
  • Emission Standards

  • Emissions
    U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
    Emissions
    U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
    Emissions
    U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
  • General

  • Engine Configuration
    V-16, 4-Stroke-Cycle Diesel
    Bore
    170 mm (6.7 in)
    Stroke
    215 mm (8.5 in)
    Displacement
    78 L (4760 in³)
    Aspiration
    Turbocharged Aftercooled
    Compression Ratio
    14.7:1
    Rotation (from flywheel end)
    Counterclockwise
    Lube System (refill)
    807 L (852 qt)
    Displacement
    4760in³
    Compression Ratio
    14.7:1
    Aspiration
    Turbocharged Aftercooled
    Rotation from Flywheel End
    Counterclockwise
    Engine Configuration
    V-16, 4-Stroke-Cycle Diesel
    Bore
    170 mm (6.7 in)
    Stroke
    215 mm (8.5 in)
    Aspiration
    Turbocharged Aftercooled
    Displacement
    78 L (4760 in³)
    Compression Ratio
    14.7:1
    Rotation from Flywheel End
    Counterclockwise
    Lube System - Refill
    807 L (852 qt)
    Engine Configuration
    V-16, 4-Stroke-Cycle Diesel
    Bore
    6.7in
    Stroke
    8.5in
  • Engine Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length
    3278 mm (129.1 in)
    Width
    1530 mm (60.2 in)
    Height
    2062 mm (81.2 in)
    Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
    7840 kg (17284 lb)
  • Engine Dimensions - Approximate

  • Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    17284lb
    Length
    129.1in
    Width
    60.2in
    Height
    81.2in
    Height
    2062 mm (81.2 in)
    Length
    3278 mm (129.1 in)
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    7840 kg (17284 lb)
    Width
    1530 mm (60.2 in)

Equipment

  • Air Inlet System
    • Air to Air Aftercooled (ATAAC)
    • Four turbochargers, center mounted
  • Control System
    • ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)
  • Cooling System
    • Thermostats and housing
    • Gear driven centrifugal jacket water pump
    • Connections for radiator cooling
  • Exhaust System
    • Exhaust manifold, dry
    • Four turbochargers with watercooled bearings
    • Two exhaust outlets, 203 mm (8 in) round flange
  • Flywheels And Flywheel Housing
    • SAE No. 00 flywheel (183 teeth)
    • SAE No. 00 flywheel housing
  • Fuel System
    • Fuel filter, LH spin-on type
    • Fuel transfer pump
    • Electronically controlled unit injectors
  • Instrumentation
    • No standard instrument or gauge panel
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filler and dipstick, LH
    • Oil pump
    • Oil filter, LH, spin-on type
    • Front sump oil pan, 500-hour change interval
  • Mounting System
    • Trunnion front support
  • Power Take Off
    • Front housing, two-sided
  • Protection System
    • ADEM A4 ECM monitoring system to provide customer programmable engine
    • Deration strategies to protect against adverse operating conditions
    • Emergency stop logic inputs provided at 40 pin customer interface connection
  • Starting System
    • Dual 24V electric starting motor, LH, unwired
  • General
    • Paint: Caterpillar yellow
    • Vibration damper
    • Lifting eyes

Request a Quote

Find a Boyd CAT
Location or Rep Near You