Gas Compression Engines:
G3616 A4 Gas Compression Engine
Contact Us About This Product
Click a link to download the document:
- Minimum Rating
- 5000.0 bhp
- Maximum Rating
- 5350.0 bhp
- Emissions
- NSPS Site Compliant Capable
- Displacement
- 20698.0 in3
G3600 A4 engines provide a wide range of power options to fit your gas compression application. G3600 A4 engines bring the highest uptime in the industry and long operating intervals between overhaul. Operators that use G3600 A4 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance. Ideal applications for G3600 A4 engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3616 A4 gas engine with ratings: 3729-3990 bkW (5000-5350 bhp) @ 1000 rpm. NSPS site compliant capable.
Product Specs
-
Engine Specifications
- Minimum Rating
- 5000.0bhp
- Maximum Rating
- 5350.0bhp
- Emissions
- NSPS Site Compliant Capable
- Displacement
- 20698.0in3
- Compression Ratio
- 9.2:1
- Aspiration
- Turbocharged-Aftercooled
- Rotation (from flywheel end)
- Counterclockwise
- Flywheel Teeth
- 255
- Oil Change Interval
- 5000 hours
- Stroke
- 11.8in
- Bore
- 11.8in
- Minimum Rating
- 5000BHP
- Maximum Rating
- 5350BHP
- Emissions
- NSPS Site Compliant Capable
- Displacement
- 20698in³
- Compression Ratio
- 9.2:1
- Aspiration
- Turbocharged-Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Flywheel Teeth
- 255
- Oil Change Interval
- 5000 hours
- Stroke
- 11.8in
- Bore
- 11.8in
- Weight - Dry
- 72000lb
- Ignition, Protection
- Electronic, ADEM™ A4
-
Capacity for Liquids
- Cooling System
- 211.0gal
- Lube Oil System (refill)
- 351.0gal
- Cooling System
- 211gal (US)
- Lube Oil System - Refill
- 351gal (US)
Equipment
-
- Air Inlet System
-
- Air cleaner — standard duty
- Inlet air adapter
-
- Control System
-
- A4 control system — provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
-
- Cooling System
-
- Jacket water pump
- Jacket water thermostats and housing
- Aftercooler pump
- Aftercooler water thermostats and housing
- Single-stage aftercooler
-
- Exhaust System
-
- Dry wrapped exhaust manifolds
- Vertical outlet adapter
-
- Flywheel & Flywheel Housing
-
- SAE standard rotation
-
- Fuel System
-
- Gas supply and and shut-off valves — electronically controlled fuel supply pressure
-
- Ignition System
-
- A4 control system — senses individual cylinder detonation and controls individual cylinder timing
-
- Instrumentation
-
- LCD display panel — monitors engine parameters and displays diagnostic codes
-
- Lube System
-
- Crankcase breathers — top mounted
- Oil cooler
- Oil filter
- Oil pan drain valve
-
- Mounting System
-
- Engine mounting feet (six total)
-
- Protection System
-
- Electronic shutoff system with purge cycle
- Crankcase explosion relief valves
- Gas shutoff valve
-
- Starting System
-
- Air starting system
-
- General
-
- Paint — Cat yellow
- Vibration dampers
-
- Air Inlet System
-
- Heavy-duty air cleaner with precleaners
-
- Charging System
-
- 35 Amp & 65 Amp charging alternators – CSA approved
-
- Exhaust System
-
- Flexible bellows adapters
- Exhaust expander
- Weld flanges
-
- Fuel System
-
- Fuel filter
- Gas pressure regulator
- Flexible connection
- Flexible connection
-
- Instrumentation
-
- Remote data monitoring and speed control
- Compatible with Cat Electronic Technician (ET) and Data View
- LCD display panel
- Color HMI display
- Modbus and Ethernet capable
-
- Lube System
-
- Air or electric motor-driven prelube
- Duplex oil filter
-
- Mounting System
-
- Mounting plates (set of six)
-
- Power Take-offs
-
- Front stub shafts
-
- Starting System
-
- Air pressure reducing valve
- Natural gas starting system
-
- General
-
- Engine barring device
- Damper guard