Gas Compression Engines:

G3412 Gas Compression Engine

G3412 Gas Petroleum Engine  Gas Compression Engines
Minimum Rating
600.0 bhp
Maximum Rating
600.0 bhp
Emissions
Non-regulated areas
Displacement
1649.0 in3

Tough and durable, built on the industry-standard G3400 platform bring maximum uptime and low operating cost to your operation. G3412 engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime.Ideal applications for G3412 engines include gas lift, gas gathering, and wellhead gas compression. Cat G3412 gas engine. Ratings: 448 bkW (600 bhp) @ 1800 rpm are available for non-regulated areas.



Product Specs

  • Engine Specifications

  • Minimum Rating
    600.0bhp
    Maximum Rating
    600.0bhp
    Emissions
    Non-regulated areas
    Displacement
    1649.0in3
    Compression Ratio
    9.7:1
    Aspiration
    Turbocharged-Aftercooled
    Rotation (from flywheel end)
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0
    Flywheel Teeth
    136
    Oil Change Interval
    750 hours
    Stroke
    6.0in
    Bore
    5.4in
    Weight - Dry
    4720lb
    Ignition, Protection
    Altronic III
    Minimum Rating
    600BHP
    Maximum Rating
    600BHP
    Emissions
    Non-regulated areas
    Displacement
    1649in³
    Compression Ratio
    9.7:1
    Aspiration
    Turbocharged-Aftercooled
    Rotation from Flywheel End
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0
    Flywheel Teeth
    136
    Oil Change Interval
    750 hours
    Stroke
    6in
    Bore
    5.4in
  • Capacity for Liquids

  • Cooling System
    20.0gal
    Lube Oil System (refill)
    45.0gal
    Cooling System
    20gal (US)
    Lube Oil System - Refill
    45gal (US)

Equipment

  • Air Inlet System
    • Air cleaner — single element with service indicator
  • Control System
    • Governor — Woodward PSG mechanica
    • Governor control — positive locking
  • Cooling System
    • Thermostats and housing
    • Jacket water pump
    • Aftercooler water pump
    • Aftercooler core
  • Exhaust System
    • Watercooled exhaust manifolds
    • Dry exhaust elbow
  • Flywheel & Flywheel Housing
    • SAE No. 0 flywheel
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Gas pressure regulator
    • Natural gas carburetor
  • Ignition System
    • Digital ignition system
  • Instrumentation
    • Service meter
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Auxiliary oil reservoir
    • Rear sump oil pan
    • Oil filler in valve cover and dipstick — RH
  • Mounting System
    • Engine supports
  • Protection System
    • Shutoff
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and drive pulleys
    • Lifting eyes
  • Air Inlet System
    • Air cleaner
    • Air inlet adapter
    • Precleaner
    • Air cleaner rain cap
  • Charging System
    • Battery chargers
    • Charging alternators
    • Ammeter gauge
    • Ammeter gauge and wiring
    • Control mounting
  • Control System
    • EG3P/2301A speed control governor
    • PSG electric governor
    • PSG pneumatic governor
  • Cooling System
    • Radiators
    • Blower fan and fan drives for customer suppliedradiators
    • ATAAC conversion
    • Aftercooler
    • Expansion tank
    • Heat exchanger
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Flanges
    • Rain caps
    • Mufflers
  • Fuel System
    • Dual gas regulator
    • Low energy fuel carburetor
    • Low pressure gas conversion
    • Propane and natural gas valve and jet kits
    • Fuel filter
  • Ignition System
    • CSA ignition
    • Ignition ground wiring harness
    • Power supply — digital ignition system
  • Instrumentation
    • Alarm module
    • Gauges and instrument panels
  • Lube System
    • Auxiliary oil reservoir removal
    • Lubricating oil
  • Mounting System
    • Vibration isolators
  • Power Take-offs
    • Auxiliary drive pulleys
    • Enclosed clutch
    • Clutch support
    • Front stub shaft
    • Flywheel stub shaft
    • Pulley removal
  • Protection System
    • Gas valves
    • Status control box interconnect wiring harness
  • Starting System
    • Air starting motor
    • Electric air start control
    • Air pressure regulator
    • Air silencer
    • Electric starting motors — single 24-volt
    • Starting aids
    • Battery sets (24-volt dry), cables, and rack
  • General
    • Tool set
    • Digital diagnostic tool

Request a Quote

Find a Boyd CAT
Location or Rep Near You