Skip to content
Logo

Cat XLM Switchgear

Overview

The Emergency Transfer and Load management (XLM) product supports transfer between the utility source and generator bus and allows for sustained parallel operation with the utility for load management applications.

Key Features

More Comfort. More Performance. More Versatility.

Flexible Operating Modes

Base Load, Import Setpoint Tracking, Export �Setpoint Tracking, or�Export Limit as well as emergency mode

Reduced Commissioning Times

High-speed network connections to Caterpillar Generator Sets reduces field interconnects

Generator Demand Priority Control

Automatically match the on-line generator capacity to the loads, and avoid unnecessary operation of generator sets

Media Gallery

Specifications

Configuration Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie, utility and load breakers for utility paralleling applications
Modes of Operation Emergency Standby, Utility Import/Export, Peak shaving, and base load operations with redundant controls and components. Closed transition to/from generator power
Application LV and MV ( 208V - 38 kV
ANSI Protective Devices 15/25, 27/59, 81 O/U, 32, 40, 50, 51
ANSI Protective Devices 15/25, 27/59, 81 O/U, 32, 40, 47, 50, 51, 86
Certifications IBS, CBC, UBC & OSHPD Certified
Control Panel Enclosure NEMA 1 or NEMA 3R, Freestanding Construction
Operating Temperature 0 degrees to 50 degrees C
Storage Temperature -20 degrees C to +60 degrees C
Low Voltage Standards NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70
Medium Voltage Standards NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110

Documents

Cat XLM Switchgear Download Cat® Extended Service Coverage (ESC) Download EMCP 4.4 Master Control Panel XLM Configuration Download Tech-Link Switchgear Remote Access System Service Tool Download Paralleling Switchgear Application & Installation Guide Download Cat® Switchgear Advanced GUI / HMI Operator Interface Download

Related power systems

ATC-800 CONTROLLER
ATC-800 CONTROLLER
Go

ATC-800 CONTROLLER
ATC Power Breaker Bypass Isolation Open/Closed Transition Automatic Transfer Switch
ATC Power Breaker Bypass Isolation Open/Closed Transition Automatic Transfer Switch
Go

ATC Power Breaker Bypass Isolation Open/Closed Transition Automatic Transfer Switch
ATC-300+ CONTROLLER
ATC-300+ CONTROLLER
Go

ATC-300+ CONTROLLER
ATC Service Entrance Rated MCCB & Power Breaker Based ATS
ATC Service Entrance Rated MCCB & Power Breaker Based ATS
Go

ATC Service Entrance Rated MCCB & Power Breaker Based ATS
ATC Contactor Based Bypass Isolation Automatic Transfer Switch
ATC Contactor Based Bypass Isolation Automatic Transfer Switch
Go

ATC Contactor Based Bypass Isolation Automatic Transfer Switch
ATC Molded Case Circuit Breaker & Molded Case Switch Automatic Transfer Switch
ATC Molded Case Circuit Breaker & Molded Case Switch Automatic Transfer Switch
Go

ATC Molded Case Circuit Breaker & Molded Case Switch Automatic Transfer Switch
ATC Contactor-Based Automatic Transfer Switch
ATC Contactor-Based Automatic Transfer Switch
Go

ATC Contactor-Based Automatic Transfer Switch
ATC Power Breaker & Case Switch Automatic Transfer Switch
ATC Power Breaker & Case Switch Automatic Transfer Switch
Go

ATC Power Breaker & Case Switch Automatic Transfer Switch
Cat® CS – ATS (Spec Grade)
Cat® CS – ATS (Spec Grade)
Go

Cat® CS – ATS (Spec Grade)
Cat® CBS – ATS with Bypass Isolation (Spec Grade)
Cat® CBS – ATS with Bypass Isolation (Spec Grade)
Go

Cat® CBS – ATS with Bypass Isolation (Spec Grade)
Cat® CG – ATS for general purpose applications
Cat® CG – ATS for general purpose applications
Go

Cat® CG – ATS for general purpose applications
Cat Customizable Switchgear and Controls
Cat Customizable Switchgear and Controls
Go

Cat Customizable Switchgear and Controls

Our Locations