930M Small Wheel Loader

Overview

The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.

Key Features

More Comfort. More Performance. More Versatility.

Reduced By 30% Engine Speed

Lower engine speed lowers fuel burn.

MORE Control

More refined control with consistent and predictable stopping distances.

Class Leading 68 dB(A) Sound Level

When running at 1,600 RPM in Standard Mode.

Media Gallery

Specifications

Maximum Gross Power	168 hp
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	156 hp
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)	588 ft·lbf
Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)	170 mhp
Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4)	168 hp
Displacement (Performance Power Mode: Speed Range 1-4)	427 in³
Note (2)	*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)	601 ft·lbf
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	158 mhp
Note (1)	Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*)	160 hp
Engine Model	Cat C7.1**
Displacement (Standard Power Mode: Speed Range 1-3*)	427 in³
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)	573 ft·lbf
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	163 hp
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)	166 mhp
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)	586 ft·lbf
Note (3)	**The Cat C7.1 engine meets Tier 4 Final/Stage V off-highway emission standards.
Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)	162 mhp
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)	587 ft·lbf
Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	164 hp
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)	572 ft·lbf
Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	156 hp

Bucket Capacities	2.1-5.0 m3 (2.7-6.5 yd3)
Bucket Capacities - Light Material	3.1-5.0 m³ (4.0-6.5 yd³)
Bucket Capacities - General Purpose	2.1-2.7 m³ (2.7-3.5 yd³)

Operating Weight	31382 lb

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level II
Note (2)	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are:<br>– Standard cab: 68 ±3 dB(A)<br>– Deluxe cab: 66 ±2 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)	*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed	2.4 s
Maximum Steering Torque - 40° (Full Turn)	27747 ft·lbf
Maximum Flow - Steering Pump	34 gal/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	3.5 turns
Maximum Working Pressure - Steering Pump	3500 psi
Maximum Steering Torque - 0° (Straight Machine)	37155 ft·lbf
Steering Articulation Angle - Each Direction	40°

Hydraulic System - Including Tank	43.6 gal (US)
Hydraulic Tank	23.8 gal (US)
Rear Axles	6.6 gal (US)
Transmission - Gear Box	2.2 gal (US)
Diesel Exhaust Fluid (DEF) Tank	5 gal (US)
Front Axles	6.9 gal (US)
Note	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Fuel Tank	51.5 gal (US)
Engine Crankcase	5.3 gal (US)
Cooling System	7.9 gal (US)

Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level	2.7 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift	5.7 s
Note (1)	*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure	3771 psi
Maximum Working Pressure - Implement Pump	3771 psi
Relief Pressure - Tilt Cylinder	4061 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure	4061 psi
Maximum Flow - Implement Pump - 4th Function Maximum Flow*	42 gal/min
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height	1.5 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift	5.1 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level	2.7 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time	10.1 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height	1.7 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time	9.3 s
Maximum Flow - Implement Pump	50 gal/min
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*	50 gal/min

Note (1)	European Union Directive “2000/14/EC”
Operator Sound Pressure (ISO 6396:2008)	72 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	101 dB(A)

Rear	Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Front	Fixed; Locking differential (standard)

Forward and Reverse - Range 1*	1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 4	25 mile/h
Forward and Reverse - Range 3	17 mile/h
Note	*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 2	8 mile/h

Note (3)	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)	Other tire choices are available. Contact your Cat dealer for details.
Note (2)	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Other Choices Include	20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires
Standard Size	20.5 R25, radial (L-3)

Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.