Save money and transport time with one rugged machine that does it all – land clearing, digging, grading, truck loading, slope work and more. Crawler loaders give you lower ground pressure and better traction so you can start the job sooner, and work longer, in all kinds of underfoot conditions. Cat® Track Loaders give you all this, plus outstanding performance and fuel efficiency.
One operator, one machine to dig, load, carry, fill and more. Fusion™ quick coupler for fast attachment changes. Purpose-built Waste, Low Ground Pressure, Ship Hold and Steel Mill loaders to get the job done.
Efficient Cat C7.1 engine. Automatic, Eco and Power modes match performance to the job to save you fuel. Remote Services and machine features save on service and maintenance.
Sized for agility and easy transport, with a Performance Series bucket option that boosts your productivity. Cat Payload technology helps optimize bucket loading for faster cycle times.
| Flywheel Power | 160 hp |
|---|---|
| Engine Model | Cat C7.1 |
| Net Power - ISO 9249/SAE J1349 | 160 hp |
| Net Power - ISO 9249 (DIN) | 162 mhp |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV, Japan 2014 emission standards or India Bharat Stage III, Eurasian Economic Union Stage IIIA, UN ECE R96 Stage IIIA emission standards, equivalent to U.S. EPA Tier 3/ EU Stage IIIA. |
| Note (1) | Cat U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV, Japan 2014 engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)*** or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Cat engines meeting Eurasian Economic Union Stage IIIA, UN ECE R96 Stage IIIA emission standards, equivalent to U.S. EPA Tier 3/ EU Stage IIIA, are compatible* with diesel fuel blended with the following lower-carbon intensity fuels*** up to: 100% biodiesel FAME (fatty acid methyl ester)**** or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use. ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. *** Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **** For use of blends higher than 20% biodiesel, consult your Cat dealer. |
| Note (2) | Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions Module (when equipped) and alternator. Advertised power is tested per the specified standard in effect at the time of manufacture. |
| Operating Weight | 34594 lb |
|---|
| Fuel Tank | 70 gal (US) |
|---|---|
| DEF Tank | 4.2 gal (US) |
| Operating Weight | 35181 lb |
|---|---|
| Width of Standard Shoe | 20 in |
| Ground Contact Area | 3720 in² |
| Ground Pressure | 10 psi |
| Operating Weight | 38055 lb |
|---|---|
| Width of Standard Shoe | 31.5 in |
| Ground Contact Area | 6045 in² |
| Ground Pressure | 6 psi |
| Operating Weight | 35662 lb |
|---|---|
| Width of Standard Shoe | 20 in |
| Ground Contact Area | 3720 in² |
| Ground Pressure | 10 psi |
| Overall Machine Length* | 251.1 in |
|---|---|
| Overall Machine Width without Bucket: With Standard Tracks - 550 mm (21.6 in) Shoes | 91.2 in |
| Machine Height - Top of Cab | 124.2 in |
| Reach at Full Lift Height and 45° Dump* | 41.4 in |
| Clearance at Full Lift Height and 45° Dump* | 111.7 in |
| Height - Bucket Hinge Pin | 142.1 in |
| Ground Clearance | 16.3 in |
| Ramp Angle | 29° |
| Note | *With General Purpose pin-on bucket |
| Track Gauge | 72.3 in |
|---|---|
| Track on Ground | 90 in |
| Track Rollers/Shoes - Each Side | 6/37 |
| Capacity - General Purpose | 2.4 yd³ |
|---|---|
| Capacity - Multi-Purpose | 2.1 yd³ |
| Capacity - Performance Series | 2.7 yd³ |
| Width - General Purpose | 97.8 in |
| Width - Multi-Purpose | 97.3 in |
| Width - Performance Series | 99.8 in |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.134 kg (2.5 lb) of refrigerant which has a CO2 equivalent of 1.622 metric tonnes (1.787 tons). |
|---|
