Overview
The TL642 is a highly versatile machine, designed to deliver maximum performance with traditional Cat reliability, durability and productivity in the toughest working conditions.
Key Features
More Comfort. More Performance. More Versatility.
EFFICIENTLY POWERFUL
Superior stability and powerful hydraulics
ALL DAY COMFORT
Exceptional all-around visibility
DEFIANTLY DURABLE
Ground level servicing for easily accessible daily checks
Specifications
| Engine Model | Cat® C3.6L |
|---|---|
| Gross Power - Basic | 73.7 hp |
| Note | Meets U.S. EPA Tier 4 Final emission standards. |
| Operating Weight | 22928 lb |
|---|
| Rated Load Capacity | 6500 lb |
|---|---|
| Maximum Lift Height | 42 ft |
| Load at Maximum Height - Stabilizers Down | 6500 lb |
| Maximum Forward Reach | 30 ft |
| Load at Maximum Reach - Stabilizers Down | 1700 lb |
| Top Travel Speed | 19 mile/h |
| Height | 8 ft |
|---|---|
| Width | 8 ft |
| Wheel Base | 11.25 ft |
| Length - Fork Face | 18.5 ft |
| Ground Clearance | 17 in |
| Turning Radius - Over Tires | 12 ft |
| Standard | 370/75-28 Duraforce Air |
|---|---|
| Optional (1) | 370/75-28 Duraforce Foam Fill |
| Optional (2) | 315/95-28 Telemaster Solid |
| Optional (3) | 13.00-24 16PR Air |
| Optional (4) | 13.00-24 12PR Foam |
| Optional (5) | 370/75-28 Non-Marking Air |
| Optional | 370/75-28 Non-Marking Foam |
| Pump Type | Single-section |
|---|
| Fuel Tank | 38.3 gal (US) |
|---|---|
| Hydraulic System | 42 gal (US) |
| Boom Up | 15.5 s |
|---|---|
| Boom Down | 10.7 s |
| Tele In | 11.8 s |
| Tele Out | 17 s |
| Drawbar Pull - Basic | 20670 lb |
| Parking Brake | Spring-applied hydraulic release on front axle |
|---|
| Features | Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle |
|---|
| Features | Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab |
|---|
| Features | Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge |
|---|
| Cubing Forks | [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) |
|---|---|
| Carriages - Side Shift | 50 in |
| Pallet Forks - Option 1 | [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) |
| Carriages - Swing | 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) |
| Carriages - Standard Tilt | 50 in |
| Lumber Forks - Option 1 | [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) |
| Pallet Forks - Option 2 | [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) |
| Carriages - Dual Fork Positioning | 50 in |
| Pallet Forks - Option 3 | [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) |
