Overview
The TL642 is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.
Key Features
More Comfort. More Performance. More Versatility.
EFFICIENTLY POWERFUL
Superior stability and powerful hydraulics
ALL DAY COMFORT
Exceptional all-round visibility
DEFIANTLY DURABLE
Ground level servicing for easily accessible daily checks
Specifications
| Engine Model | Cat® C3.6L |
|---|---|
| Gross Power - Basic | 73.7 hp |
| Note | Meets U.S. EPA Tier 4 Final emission standards. |
| Operating Weight | 22002 lb |
|---|
| Rated Load Capacity | 6500 lb |
|---|---|
| Maximum Lift Height | 42 ft |
| Maximum Forward Reach | 30 ft |
| Top Travel Speed | 19 mile/h |
| Drawbar Pull - Loaded | 20670 lbf |
| Turning Radius - Over Tires | 12 ft |
| Frame Leveling | 10° |
| Capacity at Maximum Height | 6500 lb |
| Capacity at Maximum Reach | 700 lb |
| Height | 8 ft |
|---|---|
| Width | 8 ft |
| Wheel Base | 11.25 ft |
| Length - Fork Face | 18.5 ft |
| Ground Clearance | 17 in |
| Turning Radius - Over Tires | 12 ft |
| Standard | 370/75-28 Duraforce Air |
|---|---|
| Optional (1) | 370/75-28 Duraforce Foam Fill |
| Optional (2) | 315/95-28 Telemaster Solid |
| Optional (3) | 13.00-24 16PR Air |
| Optional (4) | 13.00-24 12PR Foam |
| Optional (5) | 370/75-28 Non-Marking Air |
| Optional | 370/75-28 Non-Marking Foam |
| Gear Pump | Single-section |
|---|---|
| Auxiliary Hydraulic Pressure | 3481 psi |
| Auxiliary Hydraulic Flow | 18 gpm |
| Fuel Tank | 38.3 gal (US) |
|---|---|
| Hydraulic System | 42 gal (US) |
| Boom Up | 15 s |
|---|---|
| Boom Down | 10.3 s |
| Tele In | 9.5 s |
| Tele Out | 16.3 s |
| Parking Brakes | Wet disc, spring applied hydraulic release on front axle |
|---|---|
| Service Brakes | Inboard wet disc brakes on front and rear axles |
| Type (1) | Trunnion mounted planetary 55 degree steer axles. |
|---|---|
| Type (2) | High bias limited slip differential on front axle. |
| Carriages - Dual Fork Positioning | 50 in |
|---|---|
| Pallet Forks - Option 2 | [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) |
| Pallet Forks - Option 3 | [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) |
| Pallet Forks - Option 1 | [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) |
| Cubing Forks | [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) |
| Carriages - Standard Tilt | 50 in |
| Carriages - Side Shift | 50 in |
| Carriages - Swing | 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) |
| Lumber Forks - Option 1 | [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) |
| Forward | 4 speed |
|---|---|
| Reverse | 3 speed |
