The Cat® 160/160 AWD Motor Grader delivers power, efficiency, and operating finesse to the job. Joystick controls provide ergonomic comfort for the operator. This high-performance machine minimizes emissions with the latest control technologies, without loss of productivity.
Using Cat Grade technologies can increase your overall productivity with better accuracy, reduced rework, and lower costs.
While using Eco mode without loss of productivity.
All-wheel drive (AWD) option assists with traction and maneuvering the machine, so you can work in any environment.
| Net Power Range (Tier 4) | 224 hp |
|---|---|
| Engine Model | Cat® C9.3 |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V |
| Bore | 4.5 in |
| Displacement | 567.5 in³ |
| Stroke | 5.9 in |
| Number of Cylinders | 6 |
| Torque Rise | 39% |
| Maximum Torque - VHP Plus | 1000 lb/ft |
| Derating Altitude | 10000 ft |
| Operating Weight - Typically Equipped | 45547 lb |
|---|
| Blade Width | 14 ft |
|---|---|
| Cutting Edge Thickness | 0.6 in |
| Cutting Edge Width | 6 in |
| End Bit - Thickness | 0.6 in |
| End Bit - Width | 6 in |
| Moldboard - Blade Width | 14 ft |
| Moldboard - Height | 24 in |
| Moldboard - Thickness | 0.87 in |
| Throat Clearance | 6.5 in |
| Blade Down Pressure - Base GVW | 17004 lb |
| Blade Down Pressure - Maximum GVW | 29308 lb |
| Blade Pull - Base GVW | 25931 lb |
| Blade Pull - Maximum GVW | 34262 lb |
| Arc Radius | 16.3 in |
| Height - Top of Cab | 130 in |
|---|---|
| Length - Counterweight to Ripper | 399 in |
| Ground Clearance - Rear Axle | 13.3 in |
| Maximum Lift Above Ground | 17.8 in |
|---|---|
| Maximum Depth of Cut | 29.5 in |
| Maximum Blade Position Angle | 90 |
| Maximum Shoulder Reach Outside of Tires - Left | 82.3 in |
| Maximum Shoulder Reach Outside of Tires - Right | 89.7 in |
| Moldboard Sideshift - Left | 20.1 in |
| Moldboard Sideshift - Right | 26 in |
| Blade Tip Range - Backward | 5 |
| Blade Tip Range - Forward | 40 |
| Circle Centershift - Left | 27.4 in |
| Circle Centershift - Right | 28.7 in |
| Front Frame Structure - Height | 12.6 in |
|---|---|
| Front Frame Structure - Width | 12 in |
| Front Axle - Height to Center | 23.5 in |
| Front Axle - Total Oscillation per Side | 32 |
| Front Axle - Wheel Lean - Left/Right | 18 |
| Front-Top/Bottom Plate - Thickness | 0.87 in |
| Front-Top/Bottom Plate - Width | 12 in |
| Drawbar - Height | 6 in |
| Drawbar - Thickness | 0.5 in |
| Drawbar - Width | 3 in |
| Circle - Blade Beam Thickness | 1.6 in |
| Circle - Diameter | 61.1 in |
| Circle - Height | 6.3 in |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.994 tons). |
|---|
| Transmission | APECS, Direct Drive, Powershift |
|---|---|
| Forward/Reverse Gears | 8 Forward/6 Reverse |
| Brakes - Service - Surface Area | 3565 in² |
| Brakes - Service | Multiple Oil Disc |
| Brakes - Parking | Multiple Oil Disc |
| Brakes - Secondary | Dual Circuit Control |
| Fuel Capacity | 104 gal (US) |
|---|---|
| Diesel Exhaust Fluid | 5.8 gal (US) |
| Circle Drive Housing | 1.8 gal (US) |
| Cooling System | 15 gal (US) |
| Hydraulic System - Total | 26.4 gal (US) |
| Hydraulic System - Tank | 16.9 gal (US) |
| Transmission - Differential - Final Drives | 18.5 gal (US) |
| Tandem Housing - Each | 22.9 gal (US) |
| Engine Oil | 7.9 gal (US) |
| Front Wheel Spindle Bearing Housing | 0.13 gal (US) |
| Ripping Depth - Maximum | 16.8 in |
|---|---|
| Ripper Shank Holders | 5 |
| Ripper Shank Holder Spacing | 21 in |
| Machine Length Increase, Beam Raised | 40.6 in |
| Penetration Force | 20812 lb |
| Pry-Out Force | 28493 lb |
| Mid, V-Type - Working Width | 46.6 in |
|---|---|
| Mid, V-Type - Scarifier Shank Holders | 11 |
| Mid, V-Type - Scarifier Shank Holder Spacing | 4.6 in |
| Mid, V-Type - Scarifying Depth, Maximum | 11.5 in |
| Rear - Scarifier Shank Holders | 9 |
| Rear - Scarifier Shank Holder Spacing | 10.5 in |
| Rear - Scarifying Depth, Maximum | 16.8 in |
| Rear - Working Width | 84 in |
| Front, V-Type - Working Width | 47.4 in |
| Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders | 5 or 11 |
| Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing | 4.6 in |
| Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum | 18.4 in |
| Front, V-Type, 5 or 11 Tooth - Working Width | 40.6 in |
| Top Speed - Forward | 29.5 mile/h |
|---|---|
| Top Speed - Reverse | 23.3 mile/h |
| Articulation Angle - Left/Right | 20° |
| Steering Range - Left/Right | 50° |
| Turning Radius - Outside Front Tires | 25.59 ft |
