The Cat 120 Motor Grader offers the options of joystick or steering wheel with lever controls with all-wheel drive (AWD) option. Cab and comfort options help improve performance. Factory integrated technology options ensure grade for any project.
Use less fuel with the Cat C7.1 Engine and ECO mode.
Designed for maximum operator comfort, the next generation cab gives you control and comfort options to promote productivity.
Extend your maintenance intervals using the new filtration technology. Filters are grouped together for easy access.
| Net Power - ISO 9249/SAE J1349 | 130 hp |
|---|---|
| Standard Capability | 122 °F |
| Number of Cylinders | 6 |
| Derating Altitude (AWD) | 5499 ft |
| Torque Rise - ISO 9294 | 42% |
| Note (2) | Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Displacement | 427.8 in³ |
| Derating Altitude | 9842.5 ft |
| Maximum Torque - ISO 9249 | 606 lb/ft |
| Net Power Range (Tier 3) | 130 hp |
| Note (3) | Power as declared per ISO 14396 |
| Bore | 4.1 in |
| Engine RPM | 2,000 |
| Maximum Torque - AWD On | 611 lb/ft |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." |
| Engine Model | Cat 7.1 |
| Stroke | 5.3 in |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA |
| All-Wheel Drive Net Power Range (Tier 4) | 174 kW |
| Operating Weight - Typically Equipped | 35067 lb |
|---|
| Blade Width | 12 ft |
|---|---|
| End Bit | 6 in |
| Cutting Edge | 6 in |
| Blade Height | 24 in |
| Throat Clearance | 4.1 in |
| Arc Radius | 16.3 in |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent of 2.288 metric tonnes (2.521 tons). |
|---|
| Maximum Depth of Cut | 30.5 in |
|---|---|
| Moldboard Side Shift Left | 20.1 in |
| Circle Center Shift Left | 26 in |
| Blade Tip Range Backward | 5 |
| Maximum Lift Above Ground | 16.1 in |
| Circle Center Shift Right | 26 in |
| Blade Tip Range Forward | 40 |
| Maximum Shoulder Reach Right | 76 in |
| Moldboard Side Shift Right | 26.1 in |
| Maximum Shoulder Reach Left | 69.4 in |
| Engine Crankcase | 4.8 gal (US) |
|---|---|
| Diesel Exhaust Fluid Tank (Tier 4 Only) | 5 gal (US) |
| Hydraulic System | 25.6 gal (US) |
| Fuel Tank | 65 gal (US) |
| Transmission and Differential | 9 gal (US) |
| Circle Drive | 1.8 gal (US) |
| Cooling System | 14 gal (US) |
| Length of Machine* | 387 in |
|---|---|
| Width All Wheel Drive (AWD) | 2551 mm |
| Width | 102 in |
| Note | *Typically equipped with push block and ripper. |
| Maximum Height | 136.4 in |
| Basic Blade Width | 12 ft |
| Joystick All-Wheel Drive (AWD) Weight* Tier 4 | 36846 lb |
|---|---|
| Lever/Steering Wheel Weight* Tier 4 | 35067 lb |
| Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 | 36731 lb |
| Note (1) | *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. |
| Joystick Weight* Tier 4 | 35358 lb |
