The Cat® 982 Wheel Loader is built to push harder, load faster, and keep crews productive across the toughest jobsites. Its smart systems make operation smooth and intuitive, while its rugged design handles everything from heavy construction to mining and industrial work. With fewer service stops and strong dealer support, the 982 keeps your operation running strong—and your profits on track.
Instantly access training videos and feature guides with on-board QR code* . Autodig with Auto Set Tires delivers high fill rates and less tire wear. Versatile configurations, including remote control, for any task.
* 982 (14C) compared to 982 (14B)
Upgraded Remote Services and in-cab alerts keep the machine up-to-date and reduce troubleshooting time. Tire monitoring ensures smooth, cost-effective operation. Updated Cat Advanced Payload improves jobsite efficiency.
Cat Detect vision systems enhance visibility and risk management and support integration with people and object detection. Enables in-cab and bystander collision warnings and automatic emergency braking. With a VisionLink™ subscription, safety events report directly to the back office. Cat Command remote control lets operators work safely from a distance.
| Engine Power - 1,700 rpm ISO 14396:2002 | 432 hp |
|---|---|
| Engine Power - 1,700 rpm ISO 14396:2002 | 438 hp (metric) |
| Engine Model | Cat® C13 |
| Gross Power - 1,700 rpm SAE J1995:2014 | 436 hp |
| Gross Power - 1,700 rpm SAE J1995:2014 | 442 hp (metric) |
| Net Power - 1,700 rpm ISO 9249:2007, SAE J1349:2011 | 404 hp |
| Net Power - 1,700 rpm ISO 9249:2007, SAE J1349:2011 | 409 hp (metric) |
| Engine Torque - 1,200 rpm ISO 14396:2002 | 1620 lbf·ft |
| Gross Torque - 1,200 rpm SAE J1995:2014 | 1636 lbf·ft |
| Net Torque - 1,100 rpm ISO 9249:2007, SAE J1349:2011 | 1515 lbf·ft |
| Displacement | 763 inÂł |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. |
| Biodiesel Capability | Up to B20Âą |
| Note (1) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Note (2) | ÂąCat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels**up to: 20% biodiesel FAME (fatty acid methyl ester) ***100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details. *While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use. **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. ***Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). |
| Engine Torque @ 1,200 rpm – ISO 14396:2002 | 1620 lb/ft |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 | 1636 lb/ft |
| Note (3) | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. |
| Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 | 1515 lb/ft |
| Engine Power @ 1,700 rpm – ISO 14396:2002 | 432 hp |
| Gross Power @ 1,700 rpm – SAE J1995:2014 | 436 hp |
| Operating Weight | 78264 lb |
|---|---|
| Note | Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, open differential axles (front/rear), secondary steering, sound suppression, and a 6.1 m³ (8.0 yd³) general purpose bucket with BOCE. |
| Forward - 1 | 3.9 mile/h |
|---|---|
| Forward - 2 | 7.4 mile/h |
| Forward - 3 | 13.1 mile/h |
| Forward - 4 | 23.3 mile/h |
| Reverse - 1 | 4.3 mile/h |
| Reverse - 2 | 8.5 mile/h |
| Reverse - 3 | 15 mile/h |
| Reverse - 4 | 24.5 mile/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
| Operator Sound Pressure Level - ISO 6396:2008 | 72 dB(A) |
|---|---|
| Exterior Sound Power Level - ISO 6395:2008 | 112 dB(A) |
| Operator Sound Pressure Level - ISO 6396:2008 Âą | 72 dB(A) |
| Exterior Sound Power Level - ISO 6395:2008² | 109 dB(A) |
| Note (1) | ÂąIncluding countries that adopt the EU and UK Directives. |
| Note (2) | ²Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701. |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.600 kg (3.5 lb) of refrigerant, which has a CO2 equivalent of 2.288 metric tonnes (2.522 tons). - If equipped with R1234yf (Global Warming Potential = 0.501), the system contains 1.389 kg (3.1 lb) of refrigerant, which has a CO2 equivalent of .001 metric tonnes (1.10 tons). |
|---|
| Static Tipping Load - Full 40° Turn - With Tire Deflection | 46526 lb |
|---|---|
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 49410 lb |
| Breakout Force | 59060 lbf |
| Note (1) | For a machine configuration as defined under “Weight.” |
| Note (2) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Fuel Tank | 112.5 gal (US) |
|---|---|
| DEF Tank | 5.5 gal (US) |
| Cooling System | 13.7 gal (US) |
| Crankcase | 9.8 gal (US) |
| Transmission | 20.3 gal (US) |
| Differential - Final Drives - Front | 24.3 gal (US) |
| Differential - Final Drives - Rear | 24.3 gal (US) |
| Hydraulic Tank | 40.4 gal (US) |
| Implement System - Maximum Pump Output at 2,250 rpm | 119 gpm |
|---|---|
| Implement System - Maximum Operating Pressure | 4975 psi |
| Hydraulic Cycle Time - Total | 10.1 s |
| Height - Top of Hood | 10 ft |
|---|---|
| Height - Top of ROPS | 12.5 ft |
| Ground Clearance | 1.33 ft |
| Wheel Base | 12.5 ft |
| Overall Length - Without Bucket | 28.25 ft |
| Hinge Pin Height at Carry Height | 2.58 ft |
| Hinge Pin Height at Maximum Lift | 15.5 ft |
| Lift Arm Clearance at Maximum Lift | 12.75 ft |
| Rack Back - Maximum Lift | 57 ° |
| Rack Back - Carry Height | 48 ° |
| Width over Tires (Loaded) | 11.42 ft |
| Tread Width | 8.33 ft |
| Note | All dimensions are approximate and based on machine equipped with 6.1 mÂł (8.0 ydÂł) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. |
| Height - Top of Hood | 10 ft |
|---|---|
| Height - Top of ROPS | 12.5 ft |
| Ground Clearance | 1.33 ft |
| Wheel Base | 12.5 ft |
| Overall Length - Without Bucket | 29.92 ft |
| Hinge Pin Height at Carry Height | 2.92 ft |
| Hinge Pin Height at Maximum Lift | 16.83 ft |
| Lift Arm Clearance at Maximum Lift | 13.33 ft |
| Rack Back - Maximum Lift | 56 ° |
| Rack Back - Carry Height | 49 ° |
| Width over Tires (Loaded) | 11.42 ft |
| Tread Width | 8.33 ft |
| Note | All dimensions are approximate and based on machine equipped with 6.1 mÂł (8.0 ydÂł) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. |
