Skip to content
Logo

Overview

The Cat® 992 Large Wheel Loader has set the standard in its size class for more than 50 years, delivering industry-leading productivity, unparalleled reliability and long life. Today’s 992 raises the bar. Compared to the 992K, the new 992 is up to 48% more efficient and 32% more productive, thanks to higher payload for improved pass match, increases in rimpull and breakout force, and an optimized linkage design. Extended component replacement intervals plus increased filter and turbo life help reduce maintenance costs. These improvements — and many more — combine to provide significant savings over the life of the machine for the lowest owning and operating costs in the industry. With both standard and high-lift configurations, the 992 offers the ideal pass match for fleets of Cat 775, 777 and 785 trucks.

Key Features

More Comfort. More Performance. More Versatility.

Up to 32% More Productive

Thanks to higher rated payload, 9.5% more rimpull and 20% more breakout force

Up to 48% More Efficient

Increased productivity with zero increase in fuel burn

10% Reduction in Maintenance Costs

With 20% increase in component life, tire slip prevention and automatic retarding controls

Specifications

Net Power 814 hp
Engine Model Cat® C32B
Emissions U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent
Rated Speed 1750 rpm
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard 900 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient 937 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard 907 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient 944 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard 884 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient 921 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard 893 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient 931 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard 814 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient 814 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard 823 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient 823 hp
Bore 5.7 in
Stroke 6.4 in
Displacement 1963.5 in³
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm 3514 ft·lbf
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm 3555 ft·lbf
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm 3537 ft·lbf
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm 3570 ft·lbf
Operating Weight 233430 lb
Rated Payload - Standard 25.5 ton (US)
Rated Payload - Standard (Material Handler) 30 ton (US)
Rated Payload - High Lift 22.5 ton (US)
Rated Payload - High Lift (Material Handler) 27 ton (US)
Bucket Capacity Range 11.5-24.5 m³ (15-32 yd³)
Cat Truck Match - Standard 775/777
Cat Truck Match - High Lift 785
Bucket Capacities 11.5-24.5 m³ (15-32 yd³)
Transmission Type Cat Planetary Powershift
Forward - 1 4.3 mile/h
Forward - 2 7.4 mile/h
Forward - 3 12.7 mile/h
Direct Drive - Forward 1 Disabled
Direct Drive - Forward 2 8 mile/h
Direct Drive - Forward 3 14 mile/h
Reverse - 1 4.7 mile/h
Reverse - 2 8.1 mile/h
Reverse - 3 13.9 mile/h
Direct Drive - Reverse 1 5 mile/h
Direct Drive - Reverse 2 8.8 mile/h
Direct Drive - Reverse 3 15.3 mile/h
Lift/Tilt System - Circuit Positive Flow Control
Lift/Tilt System - Pump Variable Displacement Piston
Maximum Flow at 2,165 rpm 250 gal/min
Relief Valve Setting - Lift/Tilt 5000 psi
Lift Cylinder - Bore 9.3 in
Lift Cylinder - Stroke 63.5 in
Tilt Cylinder - Bore 11.5 in
Tilt Cylinder - Stroke 41.5 in
Rack Back 2.3 s
Rack Back - High Lift 2.3 s
Raise 9 s
Raise - High Lift 9 s
Dump 2.6 s
Dump - High Lift 2.6 s
Float Down 3.2 s
Float Down - High Lift 3.2 s
Total Hydraulic Cycle Time 17.1 s
Fuel Tank 385.7 gal (US)
Cooling Systems 59.4 gal (US)
Crankcase 31.7 gal (US)
Transmission 51.5 gal (US)
Differential - Final Drives - Front 96.4 gal (US)
Differential - Final Drives - Rear 96.4 gal (US)
Hydraulic System Factory Fill (Implement) 104.1 gal (US)
Hydraulic Tank - Implement 60.2 gal (US)
Hydraulic Factory Fill (Steering) 32.5 gal (US)
Hydraulic Tank (Steering Tank Only) 26.3 gal (US)
Front Fixed
Rear Trunnion
Oscillation Angle ±9°
Brakes ISO 3450:2011
Steering System - Circuit Pilot, Load Sensing
Steering System - Pump Piston, Variable Displacement
Maximum Flow at 1,400-1,850 rpm 70 gal/min
Steering Cut Off Pressure 4500 psi
Total Steering Angle 80°
Steering Cycle Times - Low Idle 4.9 s
Steering Cycle Times - High Idle 3.1 s
Ambient Capability Hydraulically Driven Demand Fan - Standard 109.4 °F
Ambient Capability, Hydraulically Driven Demand Fan - High 131 °F
Note Machine Sound Level (ISO 6396:2008) - 116 dB(A)
Note Machine Sound Level (ISO 6396:2008) - 113 dB(A)
Ground to Top of Exhaust Stacks 17 ft
Ground to Top of ROPS 18.3 ft
Ground to Top of Hood 13.1 ft
Ground to Center of Front Axle 4.3 ft
Ground to Bumper Clearance 3.8 ft
Ground to Lower Hitch Clearance 2.2 ft
Reach - Maximum Lift 8.2 ft
Clearance at Maximum Lift 15.2 ft
B-Pin Height - Maximum Lift 22.8 ft
Maximum Overall Height - Bucket Raised 30.8 ft
Rear Axle - Centerline to Bumper 13.5 ft
Tread Width 10.83 ft
Rack Back Angle - Maximum Lift 56.9 degrees
Dump Angle at Maximum Lift -49.5 degrees
Rack Back Angle - Ground Level 40.2 degrees
Width - Over Tires - With Bulge 14.74 ft
Wheel Base 19.3 ft
Rack Back Angle - Carry 48.9 degrees
Maximum Overall Length 50.8 ft
Front Axle Centerline to Bucket Tip 18 ft
Tread Width 10.83 ft
Rack Back Angle - Ground Level 42.5 degrees
Dump Angle at Maximum Lift -48.1 degrees
Rack Back Angle - Maximum Lift 56.2 degrees
Width - Over Tires - With Bulge 14.75 ft
Rack Back Angle - Carry 51.6 degrees
Ground to Top of Exhaust Stacks 17 ft
Ground to Top of ROPS 18.3 ft
Ground to Top of Hood 13.1 ft
Ground to Center of Front Axle 4.3 ft
Ground to Bumper Clearance 3.8 ft
Ground to Lower Hitch Clearance 2.2 ft
Reach - Maximum Lift 7.6 ft
Clearance at Maximum Lift 17.2 ft
B-Pin Height - Maximum Lift 24.5 ft
Maximum Overall Height - Bucket Raised 32 ft
Rear Axle - Centerline to Bumper 13.5 ft
Wheel Base 19.3 ft
Maximum Overall Length 51.6 ft
Front Axle Centerline to Bucket Tip 18.8 ft

Our Locations