Skip to content
Logo

Overview

Cat® Electric Rope Shovels combine immense payload capability with low maintenance requirements and high reliability to deliver the lowest cost-per-ton loading solution for long-life mines. The Cat 7495 with Rope Crowd features AC IGBT electrics for greater uptime, lower operating costs and faster cycle times. The state-of-the-art operator’s cab is the most comfortable and productivity-enhancing in the industry. The 7495 with Rope Crowd is available with a number of new technologies that provide operator assist and machine self-protection, enable proactive maintenance, and deliver real-time information on productivity and performance. An entirely electric machine, the 7495 is cleaner and more efficient than diesel-powered machines, plus its regenerative braking technology feeds electrical energy back to the grid.

Key Features

More Comfort. More Performance. More Versatility.

Reducing Environmental Impact

Using power efficiently, producing zero direct carbon emissions and regenerating power back to the grid

Efficiency-Boosting Operator Assist Technology

Reduces poor digging practices, enables consistent operator performance and provides equal or better cycle times

Leader in Reliability and Uptime

With proven AC IGBT Electric Drive System that is streamlined, simple and easy to maintain

Specifications

Dipper Payload 120 t
Dipper Capacity 30.6-62.7 m3 (40-82 yd3)
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified) 120 t
Note Dependent on application and material density
Working Weight - With Dipper and Standard Links 3056000 lb
Ballast - Furnished By Customer 667150 lb
Note (1) These weights will vary slightly depending upon dipper and optional equipment selection
Note (2) All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.
Upper Works Overall Width - Including Standard Walkways 41.9 ft
Swing Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Planetary Propel Dual-motor independent drive
Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm) Treads 36 m2 (380 kPa); 386 ft2 (55 psi)
Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard 36 ft
Hoist A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads 38 ft
Ground Bearing Pressure - Note Ground bearing pressure is dependent upon many factors
Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm) Treads 47 m2 (297 kPa); 501 ft2 (43 psi)
Type Automatic, single-line system for open gear lubricant and grease
Components (1) Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
Components (2) External FastFil from lower level
Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V
Power Requirements - 60 Hz 7,200V, 13,800V
Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V, 11,000V
System Voltage - Nominal 50/60 Hz, 7,200V
Drive IGBT Acutrol drive system
Power Requirements - Peak power 3737 kW
Power Requirements - Average Power Demand 934-1308 kW
Power Requirements - Note Other voltage options available to suit customer requirements
Rope Data - Hoist - No. 2
Rope Data - Dipper Trip - No. 1
Rope Data - Crowd - Diameter 2.5 in
Rope Data - Crowd - No. 1
Rope Data - Hoist - Diameter 2.75 in
Rope Data - Boom Suspension - Diameter 3.25 in
Rope Data - Dipper Trip - Diameter 0.75 in
Rope Data - Note High impact ropes available as an option
Rope Data - Boom Suspension - No. 4
Rope Data - Retract - No. 1
Rope Data - Retract - Diameter 2.5 in
Type One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Crowd (1) Rope Crowd with the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Crowd (2) (Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
Dipper Capacities 30.6-62.7 m3 (40-82 yd3)
Dipper Payload 120 ton (US)
Maximum Dumping Height 28.9 ft
Operating Weight 3056000 lb
Radius of Level Floor 56.1 ft
Revolving Frame Tail Swing Radius 30.5 ft
Cutting Height - Maximum 53.5 ft
Cutting Radius - Maximum 80 ft
Dumping Height - With Clearance to Open Dipper Door 28.9 ft
Note (1) Optimal working ranges based on loading a Cat 797F truck.
Note (2) *All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.

Our Locations