7395 Electric Rope Shovel

Product Specs

• Dimensions

Note

Dependent on application and material density.

Length of boom

64.0ft

Overall length of dipper handle

47.0ft

Note

Dependent on application and material density.

Dipper Payload

70t

Dipper Capacity

20.6-55.8 m3 (27-73 yd3)

• Weights

General purpose dipper - 32.1 m3 (42 yd3)

135500.0lb

Note

These weights will vary slightly depending upon dipper and optional equipment selection.

Note

All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.

Note (1)

These weights will vary slightly depending upon dipper and optional equipment selection.

Note (2)

All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.

Working Weight - With Dipper and Standard Links

2652000lb

Ballast - Furnished By Customer

574000lb

• Front End

Rope Data: Hoist – No.

2

Rope Data: Hoist – Diameter

2.75in

Rope Data: Crowd – No.

1

Rope Data: Crowd – Diameter

2.5in

Rope Data: Retract – No.

1

Rope Data: Retract – Diameter

2.5in

Rope Data: Boom susp. – No.

4

Rope Data: Boom susp. – Diameter

3.25in

Rope Data: Dipper trip – No.

1

Rope Data: Dipper trip – Diameter

0.625in

Rope Data - Dipper trip - Construction

7 × 25

Rope Data - Dipper trip - Diameter

0.625in

Rope Data - Dipper trip - No.

1

Rope Data - Dipper trip - Type

single

Rope Data - Hoist - Construction

8 × 37

Rope Data - Hoist - Diameter

2.75in

Rope Data - Hoist - No.

2

Rope Data - Hoist - Type

twin dual

Rope Data - Retract - Construction

8 × 37

Rope Data - Retract - Diameter

2.5in

Rope Data - Retract - No.

1

Rope Data - Retract - Type

single dual

Rope Data - Boom Suspension - Diameter

3.25in

Rope Data - Boom Suspension - No.

4

Rope Data - Crowd - Diameter

2.5in

Rope Data - Crowd - No.

1

Rope Data - Dipper Trip - Diameter

0.625in

Rope Data - Dipper Trip - No.

1

Rope Data - Hoist - Diameter

2.75in

Rope Data - Hoist - No.

2

Rope Data - Retract - Diameter

2.5in

Rope Data - Retract - No.

1

Components

One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.

Note

High impact ropes available as an option

Crowd

Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

• Electrical

Power Requirements – Average power demand

777-1087 kW (1,042-1,458 hp)

Power Requirements – Peak power

4165hp

Note

Other voltages available to suit customer requirements.

Drive

IGBT Acutrol drive system.

Power Requirements - Voltage

3 phase, 50/60 Hz, 7,200V

Power Requirements - 50 Hz

6,000V, 6,600V, 7,200V, 11,000V

Power Requirements - 60 Hz

7,200V

Power Requirements - Average Power Demand

777-1087 kW (1,042-1,458 hp)

Power Requirements - Peak power

4165HP

Note

Other voltages available to suit customer requirements.

• Main Structures

Upper works overall width (including standard walkways)

44.25ft

Ground Bearing Pressure

Ground bearing pressure is dependent upon many factors.

Planetary Propel

Dual-motor independent drive.

Swing

Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.

Hoist

A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.

Revolving Frame (Center Section) - Welded, impact-resistant steel: Length

27.49ft

Revolving Frame (Center Section) - Welded, impact-resistant steel: Width

14.07ft

Swing

Two planetary gearboxes, each driven by a vertically mounted motor, are mounted on either side of the revolving frame.

Swing (cont'd)

Dual-output pinion shafts from each gearbox engage the swing rack.

Turntable - Forged rim, alloy steel swing rack pitch diameter

17.0ft

Turntable - Number of tapered rollers

56

Turntable - Tapered rollers diameter

8.25in

Turntable - Tapered, forged alloy steel roller rails diameter

14.76ft

Turntable - Teeth external cut (face)

9.5in

Ground Bearing Pressure - 274.3 cm (108 in) Treads

43psi

Ground Bearing Pressure - Total Effective Bearing Area (1)

343ft²

Planetary Propel

Dual-motor independent drive.

Swing

Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.

Upper Works Overall Width - Including Standard Walkways

44.25ft

Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard

32.75ft

Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads

34.75ft

Ground Bearing Pressure

Ground bearing pressure is dependent upon many factors.

Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard

54psi

Ground Bearing Pressure - Total Effective Bearing Area (2)

442ft²

Hoist

A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.

• Optimal Working Ranges

Clearance under lowest point in truck frame/propel gearcase

2.82ft

Operator’s eye level

28.35ft

Overall width

42.68ft

• Optimal Working Ranges*

Cutting radius (maximum)

74.75ft

Radius of level floor

52.49ft

Revolving frame tail swing radius

30.51ft

Note

Optimal working ranges based on loading a Cat® 793F truck.

Note

*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.

Revolving Frame Tail Swing Radius

30.51ft

Dumping Height - With Clearance to Open Dipper Door

30.84ft

Cutting Height - Maximum

48.75ft

Cutting Radius - Maximum

74.75ft

Radius of Level Floor

52.49ft

Note (1)

Optimal working ranges based on loading a Cat® 793F truck.

Note (2)

*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.

• Lights

Types

Incandescent lights on ground lights, walkways and operator’s cab.

Types

HPS lights on boom feet, top of A-frame, machinery house, lube room, control room, utility room and flood lights.

• Lube System

Components (2)

External fast fill from lower level.

Components

External fast fill from lower level.

Components (1)

6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.

Type

Automatic, single-line system for open gear lubricant and grease.