The Cat® D2 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.
GRADE with 3D and Slope Assist™ help achieve the best quality grading results, while new technologies make machine operation easier and more efficient.
with improved fuel economy, long undercarriage life and easy maintenance.
with customizable operator settings, improvements in grade control features and optimum machine balance for smooth, fast finish grading.
| Engine Model | Cat® C3.6 |
|---|---|
| Power - Net | 92 hp |
| Displacement | 220 in³ |
| Net Power - 2,200 rpm - SAE J1349 | 92 hp |
| Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | 92 hp |
| Note (1) | Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
| Note (2) | All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
| Power Train | Hydrostatic |
|---|
| Operating Weight | 18382 lb |
|---|---|
| Operating Weight | 18382 lb |
| Operating Weight - LGP | 19066 lb |
| Note (2) | For machine with ripper, add 554 kg (1,222 lb). |
| Note (1) | Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
| FOPS | ISO 3449:2005 Level II |
|---|---|
| ROPS | ISO 3471:2008 |
| Drive Pumps | 1 |
|---|---|
| Maximum Travel Speed - Forward | 5.6 mile/h |
| Relief Valve Settings | 7033 psi |
| Maximum Travel Speed - Reverse | 6.2 mile/h |
| Track Motors | 2 |
| Length - Track on Ground - LGP | 89 in |
|---|---|
| Track Gauge | 61 in |
| Number of Rollers - Each Side | 7 |
| Track Gauge - LGP | 68 in |
| Ground Pressure - LGP | 4.3 psi |
| Shoe Width - Standard | 18 in |
| Shoe Width - LGP | 25 in |
| Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 43 |
| Number of Shoes - Each Side - Abrasion Undercarriage | 38 |
|---|---|
| Ground Pressure | 5.7 psi |
| Length of Track on Ground | 89 in |
| Fuel Tank | 51.5 gal (US) |
|---|---|
| Crankcase - With Filter | 2.8 gal (US) |
| Final Drive - Each - LGP | 2.6 gal (US) |
| Cooling System | 5 gal (US) |
| Transmission - Hydraulic Tank | 23.8 gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 4.9 gal (US) |
| Final Drives - Each Side | 2.6 gal (US) |
|---|
| Pump Output | 17.2 gpm |
|---|---|
| Relief Valve Settings | 2988 psi |
| Type | Parallelogram |
|---|---|
| Number of Shanks | 3 |
| Height | 6.5 in |
| Weight | 1222 lb |
| Maximum Digging Depth | 13.3 in |
| Maximum Ground Clearance Under Tip | 17.6 in |
| Overall Width | 67.3 in |
| Maximum Reach - Ground Line | 30.2 in |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe). See label or instruction manual for gas refrigerant identification. If machine is equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (4.0 lbs) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.873 tons). If machine is equipped with R1234yf (Global Warming Potential = 0.501), the system contains 1.7 kg (3.75 lbs) of refrigerant, which has a CO2 equivalent of less than 0.001 metric tonnes (0.001 tons). |
|---|
| BLADE: Digging Depth - LGP | 23.2 in |
|---|---|
| BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
| BLADE: Blade Lift Height - LGP | 27.9 in |
| BLADE: Blade Width - LGP | 124 in |
| BLADE: Blade Width at Maximum Angle - LGP | 113.1 in |
| Track Gauge - LGP | 67.9 in |
| Ground Clearance - LGP | 13 in |
| BLADE: Blade Height - LGP | 35.8 in |
| Overall Length - With Blade - LGP | 168.2 in |
| BLADE: Blade Capacity (SAE) - LGP | 2.42 yd³ |
| BLADE: Maximum Tilt - LGP | 17.2 in |
| BLADE: Maximum Angle (either side) - LGP | 25° |
| Note | Abrasion Undercarriage |
| Length of Basic Dozer (without blade) - LGP | 129.5 in |
| Width of Dozer (standard shoes, no blade) - Standard | 79.1 in |
| Dozer Height - LGP | 108.9 in |
| Dozer Height - Standard | 108.9 in |
| Width of Dozer (standard shoes, no blade) - LGP | 92.9 in |
| Length of Basic Dozer (without blade) - Standard | 129.5 in |
| BLADE: Maximum Angle (either side) - Standard | 25° |
|---|---|
| Ground Clearance - Standard | 13 in |
| Overall Length - With Blade - Standard | 168.5 in |
| BLADE: Blade Cutting Edge Angle, Adjustable - Standard | 52° to 58° |
| BLADE: Maximum Tilt - Standard | 15.2 in |
| Track Gauge - Standard | 61 in |
| BLADE: Digging Depth - Standard | 23.3 in |
| BLADE: Blade Width - Standard | 109.5 in |
| BLADE: Blade Lift Height - Standard | 29.3 in |
| BLADE: Blade Capacity (SAE) - Standard | 2.59 yd³ |
| BLADE: Blade Width at Maximum Angle - Standard | 100.1 in |
| Note | With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) |
| BLADE: Blade Height - Standard | 39.8 in |
| Maximum Line Speed - Full Drum | 79 ft/min |
|---|---|
| Maximum Line Speed - Bare Drum | 50 ft/min |
| Weight | 1747 lb |
| Drum Capacity - Optional Cable | 195 ft |
| Rope Diameter - Recommended | 0.63 in |
| Winch Drive | Hydraulic |
| Rope Diameter - Optional | 0.75 in |
| Drum Capacity - Recommended Cable | 277 ft |
| Maximum Line Pull - Full Drum | 20350 lb |
| Speed | Variable |
| Maximum Line Pull - Bare Drum | 32150 lb |
| Control | Hydraulic |
| Overall width | 27.91 in |
| Drum Width | 9.65 in |
| Drum Diameter | 8 in |
| Winch Length | 35.63 in |
| Throat Clearance | 5.6 in |
| Maximum line pull – bare drum | 40000 lb |
|---|---|
| Drum capacity – recommended cable | 371 ft |
| Winch length | 27.76 in |
| Overall width | 29.2 in |
| Control | Hydraulic |
| Maximum line speed – bare drum | 131 ft/min |
| Maximum line speed – full drum | 207 ft/min |
| Drum width | 10.8 in |
| Drum capacity – optional | 256 ft |
| Throat clearance | 6.75 in |
| Weight | 1345 lb |
| Rope diameter – recommended | 0.63 in |
| Speed | Variable |
| Maximum line pull – full drum | 25000 lb |
| Drum diameter | 10 in |
| Rope diameter – optional | 0.75 in |
| Winch drive | Hydrostatic |
