The Cat® 914 Small Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.
* 914 Aggregate Handler only.
| Rated Net Power - Rated Engine Speed | 2200 r/min |
|---|---|
| Maximum Gross Power - Rated Engine Speed | 1800 r/min |
| Rated Net Power - SAE J1349 | 99 hp |
| Maximum Gross Power - ISO 14396 (metric) | 112 hp |
| Rated Net Power - ISO 9249 | 98 hp |
| Maximum Gross Torque - SAE J1995 | 335 ft·lbf |
| Maximum Gross Torque - ISO 14396 | 332 ft·lbf |
| Maximum Net Torque - SAE J1349 | 329 ft·lbf |
| Maximum Net Torque - ISO 9249 | 327 ft·lbf |
| Displacement | 220 in³ |
| Bore | 3.85 in |
| Stroke | 4.72 in |
| Engine Model | Cat C3.6 |
| Emissions | Engine meets Tier 4 Final/Stage V emission standards. |
| Note | Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Maximum Gross Power - ISO 14396 | 110 hp |
| Maximum Gross Power | 110 hp |
| Bucket Capacities | 1.3-3.5 m3 (1.7-4.6 yd3) |
|---|---|
| Bucket Capacities - General Purpose | 1.3-1.9 m³ (1.7-2.5 yd³) |
| Bucket Capacities - Light Material | 2.5-3.5 m³ (3.3-4.6 yd³) |
| Operating Weight | 19103 lb |
|---|
| Maximum Flow - Steering Pump | 22 gpm |
|---|---|
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | 3.75 turns |
| Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed | 2.8 s |
| Maximum Working Pressure - Steering Pump | 3263 psi |
| Steering Articulation Angle - Each Direction | 40 ° |
| Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure | 3046 psi |
|---|---|
| Maximum Flow - Implement Pump | 39 gpm |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard | 24 gpm |
| Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure | 3046 psi |
| Hydraulic Cycle Time - Total Cycle Time | 12.5 s |
| Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift | 5.2 s |
| Maximum Flow - Implement Pump - 4th Function, Maximum Flow | 24 gpm |
| Hydraulic Cycle Time - Dump, at Maximum Reach | 1.4 s |
| Relief Pressure - Tilt Cylinder | 4931 psi |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High | 32 gpm |
| Maximum Working Pressure - Implement Pump | 4061 psi |
| Hydraulic Cycle Time - Rackback | 2.2 s |
| Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level | 3.7 s |
| Cooling System | 5.7 gal (US) |
|---|---|
| Fuel Tank | 43.6 gal (US) |
| Note | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
| Axles - Rear Center Differential | 2 gal (US) |
| Hydraulic System - Including Tank | 25.9 gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 4.8 gal (US) |
| Engine Crankcase | 2.6 gal (US) |
| Hydraulic Tank | 14.5 gal (US) |
| Transmission | 0.8 gal (US) |
| Axles - Front Center Differential | 2 gal (US) |
| Note | *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |
|---|---|
| Forward and Reverse - Speed Range 3 | 25 mile/h |
| Forward and Reverse - Speed Range 1* | 6.3 mile/h |
| Forward and Reverse - Speed Range 2* | 12.5 mile/h |
| Other Choices Include | 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid |
|---|---|
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
| Standard Size | 17.5 R25 L2 XTLA |
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Note (2) | In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. |
| ROPS | ISO 3471:2008 |
|---|---|
| FOPS | ISO 3449:2005 |
| Note (4) | *The measurements were conducted with the cab doors and windows closed. |
| Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). |
| Note (3) | The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Rear | Oscillating ±11 degrees; Locking differential (Standard) |
|---|---|
| Front | Fixed; Locking differential (standard) |
| Recyclability | 95% |
|---|
