Overview
For tough quarry and mining jobs, rely on the Cat® 735 articulated truck. Its 35.3-ton (32-tonne) payload capacity is pass-matched with excavators and loaders to help you move more material and boost productivity across any jobsite.
Key Features
More Comfort. More Performance. More Versatility.
RELIABLE PERFORMANCE
The redesigned dump body provides easier loading and maximum payload, while the C13B engine delivers the power you require, combined with relentless reliability.
BUILT-IN SAFETY
Designed for safe and convenient access with ground level service, and Dynamic Rollover Protection applies brakes when needed to help reduce the risk of rollovers.
ENHANCED OVERALL EFFICIENCY
Easily set job parameters with Body Height and Machine Speed Limiting, while achieving up to 16% more fuel efficiency with more dirt moved per fuel used.
Specifications
| Engine Model | Cat® C13B |
|---|---|
| Gross Power (SAE J1995) | 436 hp |
| Net Power (SAE J1349) | 427 hp |
| Engine Power (ISO 14396) | 431 hp |
| Bore | 5.1 in |
| Stroke | 6.2 in |
| Displacement | 763 in³ |
| Note (1) | Advertised power is tested at 1,800 rpm. |
| Note (2) | Advertised power is tested per the specified standard in effect at the time of manufacture. |
| Note (3) | Net power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed. |
| Note (4) | Net power when the fan is at maximum speed is 319 kW (427 hp) per the SAE reference conditions. |
| Note (5) | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
| Note (6) | Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
| No Engine De-rating Below | 12500 ft |
| Peak Engine Torque Gross (SAE J1995) | 1627 lbf·ft |
| Peak Engine Torque Net (SAE J1349) | 1612 lbf·ft |
| Peak Engine Torque Speed | 1200 r/min |
| Rated Payload | 35.3 ton (US) |
|---|
| Heaped (SAE 2:1) | 26.2 yd³ |
|---|---|
| Struck | 20.9 yd³ |
| Tailgate Heaped SAE 2:1 | 28.4 yd³ |
| Tailgate Struck | 22.2 yd³ |
| Forward - 1 | 5 mile/h |
|---|---|
| Forward - 2 | 9 mile/h |
| Forward - 3 | 14 mile/h |
| Forward - 4 | 22 mile/h |
| Forward - 5 | 30 mile/h |
| Forward - 6 | 35 mile/h |
| Reverse - 1 | 6 mile/h |
| Interior Cab | 72 dB(A) |
|---|---|
| Note (1) | The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Front Axle - Empty | 32584 lb |
|---|---|
| Center Axle - Empty | 11199 lb |
| Rear Axle - Empty | 10692 lb |
| Total - Empty | 54476 lb |
| Front Axle - Rated Load | 8938 lb |
| Center Axle - Rated Load | 30805 lb |
| Rear Axle - Rated Load | 30805 lb |
| Total - Rated Load | 70548 lb |
| Front Axle - Loaded | 41522 lb |
| Center Axle - Loaded | 42005 lb |
| Rear Axle - Loaded | 41498 lb |
| Total - Loaded | 125024 lb |
| Type | High strength Brinell HB450 wear resistant steel |
|---|
| Front Plate | 0.28 in |
|---|---|
| Base Plate | 0.51 in |
| Side Plates | 0.43 in |
| Fuel Tank | 105.7 gal (US) |
|---|---|
| DEF Tank | 9 gal (US) |
| Cooling System | 21.9 gal (US) |
| Hydraulic System | 32.5 gal (US) |
| Engine Crankcase | 11.4 gal (US) |
| Transmission | 12.4 gal (US) |
| Final Drives/Differential | 33 gal (US) |
| Output Transfer Gear Box | 6.6 gal (US) |
| Raise Time | 12 s |
|---|---|
| Lower Time | 11 s |
| Brakes | ISO 3450 – 2011 |
|---|---|
| Cab - FOPS | ISO 3449 Level II – 2005 |
| Cab - ROPS | ISO 3471 – 2008 |
| Steering | ISO 5010 – 2019 |
| Turning Dimensions - Steer Angle - Left/Right | 45° |
|---|---|
| Turning Dimensions - SAE Turning Radius | 294 in |
| Turning Dimensions - Clearance Radius | 318 in |
| Turning Dimensions - Inside Radius | 153 in |
| Turning Dimensions - Aisle Width | 210 in |
| Note | Dimensions are for machines equipped with 750/65 R25 tires. |
| Lock to Lock | 4.75 seconds @ 60 rpm |
|---|
| Hydraulic Excavators: 350/352 - Passes | 4-5 |
|---|---|
| Hydraulic Excavators: 336 - Passes | 5-6 |
| Wheel Loaders: 972/972 XE - Passes | 3-4 |
| Wheel Loaders: 966/966 XE - Passes | 4 |
| Wheel Loader: 962 - Passes | 4-5 |
| Wheel Loader: 950 - Passes | 5 |
| Note | An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. |
