The 725 Bare Chassis is a strong, durable Cat C9.3 engine platform with a U.S. EPA Tier 4 Final/EU Stage IV engine emission solution. Advanced Productivity Electronics Control Strategy (APECS) delivers a smooth shifting transmission, improving acceleration with higher productivity.
A uniquely combined hoist and transmission lever allows for easy operation which suits a wide range of operator experience.
Quieter, more spacious cab with improved visibility helps operators work more productively throughout the day.
Increased productivity, improved acceleration and speed performance increase on grades lead to improved performance.
| Engine Model | Cat® C9.3 |
|---|---|
| Gross Power - SAE J1995:2014 | 342 hp |
| Net Power - SAE J1349:2011 | 334 hp |
| Net Power - ISO 14396 | 338 hp |
| Bore | 4.5 in |
| Stroke | 45.2 in |
| Displacement | 567.5 in³ |
| Peak Engine Torque Speed | 1200 r/min |
| Peak Engine Torque Gross (SAE J1995) | 1275 lb/ft |
| Peak Engine Torque Net (SAE J1349) | 1263 ft·lbf |
| No Engine De-rating Required Below | 3000 ft |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat® C9.3 |
| Standard Wheel Base | 156.7 in |
|---|
| Rated Payload | 30.4 ton (US) |
|---|
| Forward - 1 | 5 mile/h |
|---|---|
| Forward - 2 | 9.4 mile/h |
| Forward - 3 | 14.4 mile/h |
| Forward - 4 | 22.1 mile/h |
| Forward - 5 | 30.7 mile/h |
| Forward - 6 | 36.3 mile/h |
| Reverse - 1 | 5.5 mile/h |
| Fuel Tank | 91 gal (US) |
|---|---|
| Cooling System | 18 gal (US) |
| Hydraulic System | 24 gal (US) |
| Engine Crankcase | 8 gal (US) |
| Transmission | 10 gal (US) |
| Output Transfer Gear Box | 5 gal (US) |
| Final Drive - Each | 1.6 gal (US) |
| DEF Tank | 4 gal (US) |
| Final Drives/Differential | 33 gal (US) |
| Brakes | ISO 3450:2011 |
|---|---|
| Cab - FOPS | ISO 3449:2005 Level II |
| Cab - ROPS | ISO 3471:2008 |
| Steering | ISO 5010:2019 |
| Lock to Lock | 4.75 seconds at 60 rpm |
|---|
| Turning Dimensions - SAE Turning Radius | 294 in |
|---|---|
| Turning Dimensions - Inside Radius | 153 in |
| Turning Dimensions - Clearance Radius | 318 in |
| Turning Dimensions - Aisle Width | 210 in |
| Turning Dimensions - Steer Angle - Left/Right | 45 ° |
| Note | Dimensions are for machines equipped with 23.5R25 tires. |
